SafePass BL100B and BL110D Boom Gate Logics Price Guide: $380

Boom Gate | BL110 Series | Logic for Torque Motor

Applications

• The BL110D boom gate logic is designed to control boom gates fitted with torque motors.  Ideal for high traffic volume situations, particularly where safety is a priority such as shopping centres, hospitals, warehouses and commercial installations
• Also used to control boom gates with torque motors, the BL100B is a boom gate logic and loop detector all-in-one and is used in the same environments as the BL110 but provides the additional functionality of a loop detector.

 

Features

BL110D Boom Gate Logic

• Control boom gates fitted with torque motors
• Has inputs for safety PE beams or loop detectors
• Has a manual override switch to assist in setting up the boom gate
• Toggle input can be used to raise and lower the boom gate from a remote push button or radio receiver.

 

BL100B Boom Gate Logic

• Combines both a loop detector and boom gate logic for gates with torque motors.
• The BL 100B features automatic closing from loop detector output. Connected internally to the logic, the loop detector is used to close the boom gate when the vehicle has passed over the loop
• Has inputs for PE safety beams or free exit loop detectors
• Manual override switch on the front of the unit can be used to open and close the boom gate.

 

Standard for BL110D and BL100B Logics

• Selectable memory/non memory input enables opening inputs to be memorised. Lets a number of vehicles to pass over the closing loop before the boom gate lower output is enabled allowing rapid entry/exit of multiple vehicles
• Automatic/manual mode allows the boom gate to be manually operated for maintenance purposes
• Barrier raise/lower relay output is used to control the motor which raises or lowers the boom gate
• Ticket vend interlock relay output is used to prevent tickets from being issued when the boom gate is in the raised position
• If a vehicle raises the boom gate then reverses out, the logic will time-out (switch selectable) and automatically lower the boom gate
• Roll-back protection - after passing the closing loop and the gate is closing, if the vehicle rolls backwards under the closing boom gate the logic will raise the boom gate again until the vehicle moves forward off the closing loop
• Facility for extra loop detector for opening input interlock - another loop detector may be used to prevent the boom gate from being raised when there is no vehicle present
• Facility for a free exit loop detector -another loop detector may be placed after the boom gate and used to raise the boom gate as a free exit option. This feature is normally used in a bi-directional lane.
• Four sensitivity settings are available on the switches
• Two switch-selectable frequency settings are available to prevent cross-talk between adjacent loops.

 

Benefits

• The BL110D boom gate logic has inputs for safety PE beams or loop detectors, has a manual override switchand a toggle input to raise and lower the boom gate from a remote push button or radio receiver
• The BL100B combines the features of a loop detector and boom gate logic into a single unit, has inputs for PE safety beams or free exit loop detectors and a manual override switch to open and close the boom gate.

 

Technical Specifications

Power Requirement	200 – 260 VAC 50/60Hz
NMI / MI Input	This input may be activated by a potential free relay contact or open collector NPN transistor output. This input is isolated from the logic.
Beam Input	This input may be activated by a potential free relay contact or open collector NPN transistor output. This input is isolated from the logic and is used as an extra safety input.
Remote Raise Input	This input may be activated by a potential free relay contact or open collector NPN transistor output. This input is isolated from the logic and is used to keep the barrier permanently open.
Raise/Lower Output	This output is a normally open relay contact rated at 0.5A/220VAC
TVI Output	This output is a normally closed relay contact rated at 0.5A/220VAC
Indicators	LED indicators show: Barrier raised and state of loop detector.
Detector Tuning Range	15 – 1500 uH.
Sensitivity	High 0.02% Medium High 0.05% Medium Low 0.1% Low 0.5%
Protection	Loop isolation transformer, tranzorb and MOV protection on loop input.
Operating Temp	40°C TO +80°C

 

Read more...

To contact Rotech Group about SafePass BL100B and BL110D Boom Gate Logics use Get a quote.

Applications

• The BL110D boom gate logic is designed to control boom gates fitted with torque motors.  Ideal for high traffic volume situations, particularly where safety is a priority such as shopping centres, hospitals, warehouses and commercial installations
• Also used to control boom gates with torque motors, the BL100B is a boom gate logic and loop detector all-in-one and is used in the same environments as the BL110 but provides the additional functionality of a loop detector.

 

Features

BL110D Boom Gate Logic

• Control boom gates fitted with torque motors
• Has inputs for safety PE beams or loop detectors
• Has a manual override switch to assist in setting up the boom gate
• Toggle input can be used to raise and lower the boom gate from a remote push button or radio receiver.

 

BL100B Boom Gate Logic

• Combines both a loop detector and boom gate logic for gates with torque motors.
• The BL 100B features automatic closing from loop detector output. Connected internally to the logic, the loop detector is used to close the boom gate when the vehicle has passed over the loop
• Has inputs for PE safety beams or free exit loop detectors
• Manual override switch on the front of the unit can be used to open and close the boom gate.

 

Standard for BL110D and BL100B Logics

• Selectable memory/non memory input enables opening inputs to be memorised. Lets a number of vehicles to pass over the closing loop before the boom gate lower output is enabled allowing rapid entry/exit of multiple vehicles
• Automatic/manual mode allows the boom gate to be manually operated for maintenance purposes
• Barrier raise/lower relay output is used to control the motor which raises or lowers the boom gate
• Ticket vend interlock relay output is used to prevent tickets from being issued when the boom gate is in the raised position
• If a vehicle raises the boom gate then reverses out, the logic will time-out (switch selectable) and automatically lower the boom gate
• Roll-back protection - after passing the closing loop and the gate is closing, if the vehicle rolls backwards under the closing boom gate the logic will raise the boom gate again until the vehicle moves forward off the closing loop
• Facility for extra loop detector for opening input interlock - another loop detector may be used to prevent the boom gate from being raised when there is no vehicle present
• Facility for a free exit loop detector -another loop detector may be placed after the boom gate and used to raise the boom gate as a free exit option. This feature is normally used in a bi-directional lane.
• Four sensitivity settings are available on the switches
• Two switch-selectable frequency settings are available to prevent cross-talk between adjacent loops.

 

Benefits

• The BL110D boom gate logic has inputs for safety PE beams or loop detectors, has a manual override switchand a toggle input to raise and lower the boom gate from a remote push button or radio receiver
• The BL100B combines the features of a loop detector and boom gate logic into a single unit, has inputs for PE safety beams or free exit loop detectors and a manual override switch to open and close the boom gate.

 

Technical Specifications

Power Requirement	200 – 260 VAC 50/60Hz
NMI / MI Input	This input may be activated by a potential free relay contact or open collector NPN transistor output. This input is isolated from the logic.
Beam Input	This input may be activated by a potential free relay contact or open collector NPN transistor output. This input is isolated from the logic and is used as an extra safety input.
Remote Raise Input	This input may be activated by a potential free relay contact or open collector NPN transistor output. This input is isolated from the logic and is used to keep the barrier permanently open.
Raise/Lower Output	This output is a normally open relay contact rated at 0.5A/220VAC
TVI Output	This output is a normally closed relay contact rated at 0.5A/220VAC
Indicators	LED indicators show: Barrier raised and state of loop detector.
Detector Tuning Range	15 – 1500 uH.
Sensitivity	High 0.02% Medium High 0.05% Medium Low 0.1% Low 0.5%
Protection	Loop isolation transformer, tranzorb and MOV protection on loop input.
Operating Temp	40°C TO +80°C

 

Read less...

To contact Rotech Group about SafePass BL100B and BL110D Boom Gate Logics use Get a quote.