Radiodetection Underground Cable & Pipe Locator Kit - SuperC.A.T

Radiodetection Underground Cable & Pipe Locator Kit - SuperC.A.T

Product Descriptions

• The RD2000 SuperC.A.T range is designed for specific utility detection, and have a number of specific features designed to make the operator's job easier and quicker.
• It sets a new standard in advanced buried cable and pipe locating, but still keeps the familiar Radiodetection operation, and is even backwards compatible with older versions of Radiodetection C.A.T and Genny products.
• SuperC.A.T cable and Pipe Locator is driven by a new signal processor and advanced software meaning performance levels usually reserved for very expensive locators are now within a wide range of budgets.
• It can locate small signals even in areas of high electrical noise and congested utilities.
• Multiple frequency selection give the operator an unprecedented level of flexibility.
• A 33KHz signal is widely used for general utility location
• 8Khz signal traces over longer distances and greater depth for hard to trace cables and pipes and finally a low frequency 640Hz signal is used for specialist tracing.

The SuperC.A.T kit is supplied complete: 

• Transmitter
• Receiver
• Direct connect leads
• Earth stake
• LPC connector
• 100mm induction signal clamp.

Features of this product

• Improved locate quality – Improved precision pinpointing of buried services and exceptionally fast sound and meter response.
• Increased usability in electrically noisy environments
• Multiple active frequencies – The ability to locate the widest of cables and pipes with the addition of a low 640Hz frequency.
• StrikeAlert™ – Alerts the user to shallow power cables by flashing an alert icon and making a distinctive sound. It is switchable in accordance to customer wishes.
• User backup – User settings are stored each time the unit is switched off whether deliberately or accidentally.
• Calibration date ID – To allow the user to know when the SuperC.A.T should be serviced, the last calibration date can be displayed.
• Passive location – Provides a sweep for buried cables and pipes, detecting Radio and Power frequencies.
• Multiple Modes - Power, Radio, Line and Sonde for both fast and precise cable and pipe location.
• Automatic Depth - Whenever the SuperC.A.T can ascertain a depth reading, it is automatically displayed.
• Inductive Modes - Work with either an inductive signal clamp or by wireless signal coupling.

Read more...

To contact Test Equipment about Radiodetection Underground Cable & Pipe Locator Kit - SuperC.A.T use Get a quote.

Product Descriptions

• The RD2000 SuperC.A.T range is designed for specific utility detection, and have a number of specific features designed to make the operator's job easier and quicker.
• It sets a new standard in advanced buried cable and pipe locating, but still keeps the familiar Radiodetection operation, and is even backwards compatible with older versions of Radiodetection C.A.T and Genny products.
• SuperC.A.T cable and Pipe Locator is driven by a new signal processor and advanced software meaning performance levels usually reserved for very expensive locators are now within a wide range of budgets.
• It can locate small signals even in areas of high electrical noise and congested utilities.
• Multiple frequency selection give the operator an unprecedented level of flexibility.
• A 33KHz signal is widely used for general utility location
• 8Khz signal traces over longer distances and greater depth for hard to trace cables and pipes and finally a low frequency 640Hz signal is used for specialist tracing.

The SuperC.A.T kit is supplied complete: 

• Transmitter
• Receiver
• Direct connect leads
• Earth stake
• LPC connector
• 100mm induction signal clamp.

Features of this product

• Improved locate quality – Improved precision pinpointing of buried services and exceptionally fast sound and meter response.
• Increased usability in electrically noisy environments
• Multiple active frequencies – The ability to locate the widest of cables and pipes with the addition of a low 640Hz frequency.
• StrikeAlert™ – Alerts the user to shallow power cables by flashing an alert icon and making a distinctive sound. It is switchable in accordance to customer wishes.
• User backup – User settings are stored each time the unit is switched off whether deliberately or accidentally.
• Calibration date ID – To allow the user to know when the SuperC.A.T should be serviced, the last calibration date can be displayed.
• Passive location – Provides a sweep for buried cables and pipes, detecting Radio and Power frequencies.
• Multiple Modes - Power, Radio, Line and Sonde for both fast and precise cable and pipe location.
• Automatic Depth - Whenever the SuperC.A.T can ascertain a depth reading, it is automatically displayed.
• Inductive Modes - Work with either an inductive signal clamp or by wireless signal coupling.

Read less...

To contact Test Equipment about Radiodetection Underground Cable & Pipe Locator Kit - SuperC.A.T use Get a quote.