Artesyn - Rack Mount Modular High Power System | ’s iHP Get latest price

Rack Mount Modular High Power System | ’s iHP

Rack Mount Modular High Power System | ’s iHP

30 Recent Views In Stock

Artesyn’s iHP configurable intelligent power system provides up to 24 kW in 3 kW increments and can be configured for up to 8 outputs using a wide variety of plug-in modules that address a large range of voltages and currents.

Safety approvals secured by Artesyn eliminate the need for an isolation transformer in medical equipment. The iHP power system also has industrial safety approvals, including compliance to the SEMI F47 standard for semiconductor processing equipment.In horticultural LED lighting, bulk high voltage current sources eliminate the need for individual LED array drivers and reduce installation and operating costs. For chemical processing and water treatment applications, the compact size and multi-rack paralleling of the iHP series can accommodate large installations up into the Megawatt range. The unit’s software interface can be programmed to run sophisticated process flows.

Standard modules provide a wide range of bulk power as input to laser drivers. For laboratory equipment, precision modules in development provide low noise and accurate control of voltage and current source with built-in wireless communication to a remote control panel. For electroplating and etching applications, Artesyn is developing modules to provide enhanced programmable rise and fall times coupled with a high-level software interface that can be tailored to exact process requirements.

The iHP power system offers developers either an analog or digital interface to their system supporting standard communications protocols, while a software graphical user interface (GUI) allows for easy configuration.

• Multi output intelligent and modular high power system
• Standard 19” rack
• Outputs parallel up to 1600 A
• Outputs series up to 1000 V
• 100% digital control ? Outputs program as voltage or current source
• Versatile input configurable to: • Low line 180-264 Vac single phase and 3-phase • High line 342-528 Vac 3-phase
• Medical safety approved – NO ISOLATION XFMR NEEDED
• Flexible control interfaces (Note 1)
• Air cooled
• Semi F47 compliance
• Field upgradeable firmware
• Programmable slew rate
• Fast current slew rate up to 200 Hz
• Active power factor correction
• User defined command profiles
• Total Power: Up to 24 KW
• Input Voltage: 180-264 Vac 342-528 Vac
• Single Phase or 3-Phase # of Outputs: Up to 8

Our engineers will size and configure the right solution to meet your applications' needs by using a wide variety of plug-in modules that address a large range of voltages and currents. Every project is different and has the same importance for us. Don't hesitate to get in touch; Helios DC experts will take great care to understand the real needs and objectives of your power system.

Read more...

To contact Helios Power Solutions about Artesyn Rack Mount Modular High Power System | ’s iHP use Get a quote.

Artesyn’s iHP configurable intelligent power system provides up to 24 kW in 3 kW increments and can be configured for up to 8 outputs using a wide variety of plug-in modules that address a large range of voltages and currents.

Safety approvals secured by Artesyn eliminate the need for an isolation transformer in medical equipment. The iHP power system also has industrial safety approvals, including compliance to the SEMI F47 standard for semiconductor processing equipment.In horticultural LED lighting, bulk high voltage current sources eliminate the need for individual LED array drivers and reduce installation and operating costs. For chemical processing and water treatment applications, the compact size and multi-rack paralleling of the iHP series can accommodate large installations up into the Megawatt range. The unit’s software interface can be programmed to run sophisticated process flows.

Standard modules provide a wide range of bulk power as input to laser drivers. For laboratory equipment, precision modules in development provide low noise and accurate control of voltage and current source with built-in wireless communication to a remote control panel. For electroplating and etching applications, Artesyn is developing modules to provide enhanced programmable rise and fall times coupled with a high-level software interface that can be tailored to exact process requirements.

The iHP power system offers developers either an analog or digital interface to their system supporting standard communications protocols, while a software graphical user interface (GUI) allows for easy configuration.

• Multi output intelligent and modular high power system
• Standard 19” rack
• Outputs parallel up to 1600 A
• Outputs series up to 1000 V
• 100% digital control ? Outputs program as voltage or current source
• Versatile input configurable to: • Low line 180-264 Vac single phase and 3-phase • High line 342-528 Vac 3-phase
• Medical safety approved – NO ISOLATION XFMR NEEDED
• Flexible control interfaces (Note 1)
• Air cooled
• Semi F47 compliance
• Field upgradeable firmware
• Programmable slew rate
• Fast current slew rate up to 200 Hz
• Active power factor correction
• User defined command profiles
• Total Power: Up to 24 KW
• Input Voltage: 180-264 Vac 342-528 Vac
• Single Phase or 3-Phase # of Outputs: Up to 8

Our engineers will size and configure the right solution to meet your applications' needs by using a wide variety of plug-in modules that address a large range of voltages and currents. Every project is different and has the same importance for us. Don't hesitate to get in touch; Helios DC experts will take great care to understand the real needs and objectives of your power system.

Read less...

To contact Helios Power Solutions about Artesyn Rack Mount Modular High Power System | ’s iHP use Get a quote.