Programmable Insulation Resistance Tester | AEMC Megohmmeter 6550 10kV Get latest price

Programmable Insulation Resistance Tester | AEMC Megohmmeter 6550 10kV

25 Recent Views In Stock

It is the only fully automated 10,000V graphical insulation tester. The Model 6550 is packaged in a rugged case that is IP54 when closed. Test results and configuration information is provided on a graphical LCD screen as well as exportable through the use of DataView® software provided. This megohmmeter can operate on battery or AC power while testing.

The Model 6550 also offers the ability to program up to three step voltage profiles (from 40 to 10,000), each containing up to ten steps. There are also ramp profiles and three programmable test voltages in addition to the standard fixed voltages of 500, 1000, 2500, 5000 and 10,000V.

Features:

• Detection and measurement of input voltage, frequency, and current prior to running a test
• Measurements at a fixed test voltage of 500, 1000, 2500, 5000, 10,000VDC
• Ramp voltage measurements with a ramp from 40 to 1100V
• Step voltage measurements with steps from 40 to 10,000V
• Non-destructive (Early break) test, test stopped at a preset current (Break at I-limit) or Burn mode with no predefined stop point
• Digital filtering of insulation measurements
• Live measurement of the voltage to warn the operator of potentially unsafe conditions
• Programmable thresholds to trigger audible
• Timed measurement duration checks
• Fuse protection with display indication of defective fuse condition
• Stores up to 80,000 measurements
• Optically-isolated USB communication for transfer onto PC and report generation with the included DataView® software

Applications:

• Acceptance testing and preventive maintenance
• Test motors, pumps, valves, cables, switchgear and electrical wiring installations
• Continuity checks
• High resistance or absorption tests
• Spot reading tests
• Timed resistance measurements
• Dielectric Absorption Ratio (DAR) and Polarization Index (PI) tests
• Multi-layer insulation testing (DD)
• Test old or water damaged installations over long time periods
• Motor insulation resistance measurements

 

Read more...

To contact Test Equipment about Programmable Insulation Resistance Tester | AEMC Megohmmeter 6550 10kV use Get a quote.

It is the only fully automated 10,000V graphical insulation tester. The Model 6550 is packaged in a rugged case that is IP54 when closed. Test results and configuration information is provided on a graphical LCD screen as well as exportable through the use of DataView® software provided. This megohmmeter can operate on battery or AC power while testing.

The Model 6550 also offers the ability to program up to three step voltage profiles (from 40 to 10,000), each containing up to ten steps. There are also ramp profiles and three programmable test voltages in addition to the standard fixed voltages of 500, 1000, 2500, 5000 and 10,000V.

Features:

• Detection and measurement of input voltage, frequency, and current prior to running a test
• Measurements at a fixed test voltage of 500, 1000, 2500, 5000, 10,000VDC
• Ramp voltage measurements with a ramp from 40 to 1100V
• Step voltage measurements with steps from 40 to 10,000V
• Non-destructive (Early break) test, test stopped at a preset current (Break at I-limit) or Burn mode with no predefined stop point
• Digital filtering of insulation measurements
• Live measurement of the voltage to warn the operator of potentially unsafe conditions
• Programmable thresholds to trigger audible
• Timed measurement duration checks
• Fuse protection with display indication of defective fuse condition
• Stores up to 80,000 measurements
• Optically-isolated USB communication for transfer onto PC and report generation with the included DataView® software

Applications:

• Acceptance testing and preventive maintenance
• Test motors, pumps, valves, cables, switchgear and electrical wiring installations
• Continuity checks
• High resistance or absorption tests
• Spot reading tests
• Timed resistance measurements
• Dielectric Absorption Ratio (DAR) and Polarization Index (PI) tests
• Multi-layer insulation testing (DD)
• Test old or water damaged installations over long time periods
• Motor insulation resistance measurements

 

Read less...

To contact Test Equipment about Programmable Insulation Resistance Tester | AEMC Megohmmeter 6550 10kV use Get a quote.