Uticor - Power Supply | Built-in Display/Diagnostics

Power Supply | Built-in Display/Diagnostics

With a typical power supply you will need to have a volt meter and a clamp current meter to find out the load on the SMPS. EZPPS changes this forever. In addition all SMPS’s have limited life due to the electrolytic capacitors, and dependent on the current draw and the temperature of the power supply. EZPPS keeps track of total number of hours it has been ON and provides an alarm for preventive maintenance and replacement before the power supply dies a sudden death.

Programmable Power Supply with Display

• 3 Digit LED Display for Voltage
• Class 2 for up to 90W Models
• 2 Digit LED Display for Current
• Programmable Current Limit
• Maint. Timer Remaining Time 1.2 K Hrs
• Adjustable Voltage Setting

 

Benefits of NEC National Electric Code Class 2 limits the max. voltage and current. Such Class 2 circuits have reduced requirements regarding wire size, derating factors, overcurrent protection, insulation, wiring methods and installation materials. Considering Class 2 in a system can be an important factor for reducing the cost and improving the flexibility of the system. Especially when the voltage level of the control circuits is shifted from AC 120V to a DC voltage with 24V <100W, Class 2 would be applicable.

For more information on the DIN-Mount Programmable Power Supply please call us or email use the IndustrySearch email enquiry for a direct reply.

Read more...

To contact Uticor AVG about Uticor Power Supply | Built-in Display/Diagnostics use Get a quote.

With a typical power supply you will need to have a volt meter and a clamp current meter to find out the load on the SMPS. EZPPS changes this forever. In addition all SMPS’s have limited life due to the electrolytic capacitors, and dependent on the current draw and the temperature of the power supply. EZPPS keeps track of total number of hours it has been ON and provides an alarm for preventive maintenance and replacement before the power supply dies a sudden death.

Programmable Power Supply with Display

• 3 Digit LED Display for Voltage
• Class 2 for up to 90W Models
• 2 Digit LED Display for Current
• Programmable Current Limit
• Maint. Timer Remaining Time 1.2 K Hrs
• Adjustable Voltage Setting

 

Benefits of NEC National Electric Code Class 2 limits the max. voltage and current. Such Class 2 circuits have reduced requirements regarding wire size, derating factors, overcurrent protection, insulation, wiring methods and installation materials. Considering Class 2 in a system can be an important factor for reducing the cost and improving the flexibility of the system. Especially when the voltage level of the control circuits is shifted from AC 120V to a DC voltage with 24V <100W, Class 2 would be applicable.

For more information on the DIN-Mount Programmable Power Supply please call us or email use the IndustrySearch email enquiry for a direct reply.

Read less...

To contact Uticor AVG about Uticor Power Supply | Built-in Display/Diagnostics use Get a quote.