Power Pole | Distribution & Sub Transmission

Power Pole | Distribution & Sub Transmission

All of the standard range conforms to AS/NZS standards, ASCE/SEI 48-05 and to the ENA Pole Supply and Performance Specification. The length and tip loads of the standard range make INGAL EPS steel poles a direct replacement for the most common timber and concrete poles and with significant advantages.

Benefits

• Lightest poles across the full range of length and tip loads
• Conform to all relevant AS/NZS standards
• Conform to ASCE/SEI 48-05
• Conform to ENA Pole Supply and Performance Specification (separate documentation)
• Non combustible with proven bush fire performance
• Self bonding
• Impervious to insects and rot
• Fully recyclable with end of life salvage value
• Standard poles comprise of:
  • 12-sided pole shaft
  • Welded top cap
  • Mounting holes
  • Identification plate
  • Earth point above nominal ground line
  • Additional in-ground corrosion protection 200mm above and 400mm below nominal ground line
  • Anti sink strap
  • Hot dip galvanised finish

Options and Accessories

• Unlimited variations in the length, diameters, tip loads and hole arrangements
• 8-sided, 16-sided or tapered round variations
• Climbing rungs and other brackets/fittings
• Cross arms

Read more...

To contact Ingal EPS about Power Pole | Distribution & Sub Transmission use Get a quote.

All of the standard range conforms to AS/NZS standards, ASCE/SEI 48-05 and to the ENA Pole Supply and Performance Specification. The length and tip loads of the standard range make INGAL EPS steel poles a direct replacement for the most common timber and concrete poles and with significant advantages.

Benefits

• Lightest poles across the full range of length and tip loads
• Conform to all relevant AS/NZS standards
• Conform to ASCE/SEI 48-05
• Conform to ENA Pole Supply and Performance Specification (separate documentation)
• Non combustible with proven bush fire performance
• Self bonding
• Impervious to insects and rot
• Fully recyclable with end of life salvage value
• Standard poles comprise of:
  • 12-sided pole shaft
  • Welded top cap
  • Mounting holes
  • Identification plate
  • Earth point above nominal ground line
  • Additional in-ground corrosion protection 200mm above and 400mm below nominal ground line
  • Anti sink strap
  • Hot dip galvanised finish

Options and Accessories

• Unlimited variations in the length, diameters, tip loads and hole arrangements
• 8-sided, 16-sided or tapered round variations
• Climbing rungs and other brackets/fittings
• Cross arms

Read less...

To contact Ingal EPS about Power Pole | Distribution & Sub Transmission use Get a quote.