Pack King Drum Tipper / Lifter/ Morse

Pack King - Drum Tipper / Lifter/ Morse

Supplier: Pack King

Drum Tipper / Lifter/ Morse

MORSE have devised a series of mobile lifter/tippers suited to both steel and plastic drums. They are all fabricated on the premises by a team of artisans.

144 Recent Views In Stock

Lifting and tipping 200 Ltr drums presents a range of obstacles, due mainly to the fact that the drum cannot be safely moved or raised by a single person, so a dedicated device must be used.

The single mast lift system can raise a drum to 1520mm, whilst the two-stage mast system can raise a drum to 2690mm.

Maximum drum weights are 363 Kgs for a full drum, and 227 Kgs for a half drum. Remembering that half loads shift as they rotate, hence the difference.

You have the choice of three types of lift/tip systems.

Manual lift / manual tilt. Uses a hydraulic hand pump to lift and manual wheel or chain loop to tilt.
Powered lift / manual tilt. Uses mains, battery or air over hydraulic power pack to lift, and manual wheel or chain loop to tilt.
Powered lift / powered tilt. Uses mains, battery or air over hydraulic power pack to do both.

With the above air option, the MORSE drum Lifter/tipper can be used in hazardous areas by using ‘M’ designated parts that are Spark-Resistant, along with anti-static measures.

Stainless steel options are also available for use in the food, pharmaceutical, chemical industries.

The MORCINCH accessories enable you to capture plastic drums and drums of other sizes. There are also drum taps; bolt-on lids; bolt-on cones; slide valves and much more. So if your drum handling situation needs sorting out, or you just cannot find a solution, talk with a Pack King rep today for the answers.

To contact Pack King about Pack King Drum Tipper / Lifter/ Morse use Get a quote.

Lifting and tipping 200 Ltr drums presents a range of obstacles, due mainly to the fact that the drum cannot be safely moved or raised by a single person, so a dedicated device must be used.

The single mast lift system can raise a drum to 1520mm, whilst the two-stage mast system can raise a drum to 2690mm.

Maximum drum weights are 363 Kgs for a full drum, and 227 Kgs for a half drum. Remembering that half loads shift as they rotate, hence the difference.

You have the choice of three types of lift/tip systems.

Manual lift / manual tilt. Uses a hydraulic hand pump to lift and manual wheel or chain loop to tilt.
Powered lift / manual tilt. Uses mains, battery or air over hydraulic power pack to lift, and manual wheel or chain loop to tilt.
Powered lift / powered tilt. Uses mains, battery or air over hydraulic power pack to do both.

With the above air option, the MORSE drum Lifter/tipper can be used in hazardous areas by using ‘M’ designated parts that are Spark-Resistant, along with anti-static measures.

Stainless steel options are also available for use in the food, pharmaceutical, chemical industries.

Read less...

To contact Pack King about Pack King Drum Tipper / Lifter/ Morse use Get a quote.

Let Pack King provide you with a quote

Supplier

Get a quote

Supplier: Pack King

Distribution: Australia, USA, Canada

Location: Bayswater , VIC

Customers: Assa Abloy, Avangrid, Wattyl

Trade With Confidence. The supplier of this item is approved as a Verified Supplier. Business registration, contact details and locations have been verified. Pack King are also proudly displaying these credentials:

Established:

2018

Employees:

1-5

Customers:

Assa Abloy, Avangrid, Wattyl

Distribution:

Australia, USA, Canada

Location:

Bayswater , VIC

Joined:

May 2019