OxTS - GPS Inertial Navigation System | xOEM v3 Get latest price

GPS Inertial Navigation System | xOEM v3

GPS Inertial Navigation System | xOEM v3

35 Recent Views In Stock

xOEM 500

Based on the xNAV500 system, the xOEM500 offers all the same great features and functionality but as an embedded GNSS+INS board set, shedding over two thirds of the weight and allowing manufacturers to integrate and build directly into their product. 

The xOEMcore is a combined 6-axis inertial measurement unit and navigation system with sensor fusion in one compact OEM module. In its base form the xOEMcore measures and outputs raw accelerations and angular rates with small, high-grade MEMS gyros and accelerometers. But with a simple upgrade the xOEMcore is turned into a full inertial navigation system, able to take aiding data from external sources such as GNSS and blend it in the on-board Kalman filter. It is ideal for integration inside any solution that requires robust, high-performance position and orientation.

 

Specifications:

Parameters
Position accuracy	2 m SPS 0.5 m DGPS
Velocity accuracy	0.1 km/h RMS
Accelerationaccuracy	10 mm/s²
Acceleration range	50m/s²
Roll/Pitch	0.05°
Heading	0.15°
Angular Rate in-run bias stability	3°/hr
Angular Rate range	300°/s
Measurement rate	100Hz
Position drift (post-processed, using odometer)	2.5m (1 minute or 1km)
Operating temperature	-30°C to +70°C
Power input	10 - 31V
Power consumption
Dimensions (mm)	125 x 77 x 36
Weight	< 380g
Logging capacity	24 hrs (IMU+GPS)
Interfaces	Ethernet, Serial
Dual Antenna	Yes

 

xOEM Core

Technology	MEMS	MEMS
Range	5 g	300°/s
Bias stability	0.05 mg	3°/hr
Linearity	0.05%	0.05%
Scale factor	0.05%	0.05%
Random walk	5 mg/√hr	0.5°/√hr
Axis alignment error

 

Note: Specification valid for ±1g and open-sky conditions.

Read more...

To contact Industrial Measurement Solutions about OxTS GPS Inertial Navigation System | xOEM v3 use Get a quote.

xOEM 500

Based on the xNAV500 system, the xOEM500 offers all the same great features and functionality but as an embedded GNSS+INS board set, shedding over two thirds of the weight and allowing manufacturers to integrate and build directly into their product. 

The xOEMcore is a combined 6-axis inertial measurement unit and navigation system with sensor fusion in one compact OEM module. In its base form the xOEMcore measures and outputs raw accelerations and angular rates with small, high-grade MEMS gyros and accelerometers. But with a simple upgrade the xOEMcore is turned into a full inertial navigation system, able to take aiding data from external sources such as GNSS and blend it in the on-board Kalman filter. It is ideal for integration inside any solution that requires robust, high-performance position and orientation.

 

Specifications:

Parameters
Position accuracy	2 m SPS 0.5 m DGPS
Velocity accuracy	0.1 km/h RMS
Accelerationaccuracy	10 mm/s²
Acceleration range	50m/s²
Roll/Pitch	0.05°
Heading	0.15°
Angular Rate in-run bias stability	3°/hr
Angular Rate range	300°/s
Measurement rate	100Hz
Position drift (post-processed, using odometer)	2.5m (1 minute or 1km)
Operating temperature	-30°C to +70°C
Power input	10 - 31V
Power consumption
Dimensions (mm)	125 x 77 x 36
Weight	< 380g
Logging capacity	24 hrs (IMU+GPS)
Interfaces	Ethernet, Serial
Dual Antenna	Yes

 

xOEM Core

Technology	MEMS	MEMS
Range	5 g	300°/s
Bias stability	0.05 mg	3°/hr
Linearity	0.05%	0.05%
Scale factor	0.05%	0.05%
Random walk	5 mg/√hr	0.5°/√hr
Axis alignment error

 

Note: Specification valid for ±1g and open-sky conditions.

Read less...

To contact Industrial Measurement Solutions about OxTS GPS Inertial Navigation System | xOEM v3 use Get a quote.