Omni-Mark 3 HP Moisture Analyser Control Get latest price

Read more...

To contact Thermo Fisher Scientific Australia Pty Ltd about Omni-Mark 3 HP Moisture Analyser Control use Get a quote.

The Omnimark Mark 3 HP Moisture Analyzer :

• Display of Results 0.001%
• Balance Resolution 0.0001 grams
• Balance capacity 100 grams
• Balance repeatability +/-0.5mg +/-0.1mg
• Method of Measurement: Loss on Drying
• Modular configuration: Control and Heater modules (Optional: up to 4 Heating modules)
• Heat Source: Four parallel infrared quartz cylinders
• Temperature Setting/Control: 30-210°C in one degree increments/RTD sensor, +/- 1°C
• Temperature Steps: Programmable one or two with selectable ramp rate
• Temperature Adjustment: Optional fixture for Internal electronic two point adjustment
• Standby Temperature: 30-160°C in one degree increments with selectable equilibration time
• Temperature display: Display of both target and current temp at each stage of drying and standby
• Conserve Mode Clock: Programmable time by day of week to shut down and wake up analyzer
• Balance Calibration: Internal calibration weight or external manual
• Ideal Weight: Audio and visual display for programmable target sample weight addition
• Target limit alert: Minimum and maximum programmable limits and screen alert when test done
• Program Storage: 300 programs with unique settings, alphanumeric naming
• Result Storage: 999 results with statistics: Average, SD, RSD, high and low
• Units of Measure of Results: Weight, %Moisture, %Solids, %Volatiles, Fuel Moisture, PPM
• Endpoint Determination: Actual slope, Calculation and Time modes
• Sample ID: Numeric, Numeric incrementing, alphanumeric or turned Off
• Modes of Operation: Standard test, Syringe or Concentration modes
• Operator Names: Twenty alphanumeric operator names
• Security Mode: Selectable setup and operation protection with passcode
• Graph Mode: Graph of Temperature/time and Percent/time
• Display: Quarter VGA with contrast adjustment (black on white or white on black)
• Keypad: Sealed membrane with audible tactile feedback
• External Input/Output: Serial, USB and Ethernet
• Internal printer
• Internal Clock: Date and Time: U.S. or International, Military or AM/PM
• Audible Tone: Key stoke, ideal weight met and end of test, selectable On or Off
• System Status Indicator Lights: Two tri-color LEDs (balance & heater) on front of Heater module

The Omnimark Mark 3 HP Reconditioned is a rapid moisture determination system that specializes in high moisture analysis processing.

• Samples yield results in less than 1 minute
• Sensor technology determines when water is fully liberated

The Mark 3 Moisture Analyzers work on the idea of loss on drying. Over a predetermined time period, the instrument settles on a predetermined rate of weight change compared to the sample’s real initial weight. To ensure advanced moisture analysis, they have a built-in temperature and weight calibration function.

The Mark 3’s modular design allows for up to four heating units to be added, allowing for even parallel readings of different samples.

The Omnimark Mark 3 HP Moisture Analyzer is a flexible system for food production facilities and labs. It increases the accuracy and precision of your analytical results. The optional modular add-ons is a feature commonly used for the best results in every measuring task. Its high-resolution weighing system which creates the Mark 3 HP to be the most precise analyzer for moisture and water content of very dry samples.

There are more than 10,000 applications that are linked to standard procedures for many industries such as:

• Pharmaceutical
• Plastics
• Foods
• Sugar
• Chemical
• Cosmetic
• Waste treatment & more…

The most commonly used glass fiber sample pad for this instrument would be the LIS Glass Fiber Sample Pad Round 9cm.

Read less...

To contact Thermo Fisher Scientific Australia Pty Ltd about Omni-Mark 3 HP Moisture Analyser Control use Get a quote.