NewTek Sensor Solutions - NT-C-5000- LVDT Signal Conditioner

NT-C-5000- LVDT Signal Conditioner

Bestech Australia supplies C-5000, a versatile LVDT signal conditioner with applications ranging from steam valve position feedback, governor & throttle valves, interceptor & stop valves, boiler feedwater pumps and turbine control systems.

 

It supports a wide range of AC LVDTs and RVDTs, with output non-linearity ≤±0.25% FS. NT-C-5000 simplifies calibration setup with built-in null indicators and front panel pushbutton controls to set up zero and full-scale output, bringing machinery downtime to a minimum. The choice of 4 excitation frequencies and 8 analog outputs with 40dB dynamic range of AC output indicates most common system failures by flashing LED codes.

 

NT-C-5000 LVDT signal conditioner digitally communicates with up to 16 addresses simultaneously via auto-master syncing, where master output couples up to fifteen slave units. If the master should fail,

new master will automatically be generated for fail-safe excitation.

 

Key features of LVC-4000:

• Smart setup with front panel push buttons
• Built-in null indication with front panel LEDs
• Auto-mastering fail-safe excitation syncing for multiple units
• Self-diagnostics for LVDT failure or disconnect
• Digital communications via RS-485 2-wire multi-drop bus
• Hot swapability --- setup can be saved and reloaded via RS-485 port

 

User selectable features:

• +15 to +30 V DC (+24 V nominal), 60 mA max. at 24 V DC; +15 V DC and -15 V DC needed for ±10 V DC bipolar output
• 1 kHz, 3 kHz, 5 kHz, 10 kHz (nominal) excitation frequency
• Master output couples up to fifteen slave units; if master fails, new master is automatically generated for fail-safe excitation

 

Operation environment data:

Operating Temperature: 0 to 75°C

Temperature Sensitivity: +/-0.002% of FSO/C (combined zero and span shift)

 

 

Read more...

To contact Bestech Australia about NewTek Sensor Solutions NT-C-5000- LVDT Signal Conditioner use Get a quote.

Bestech Australia supplies C-5000, a versatile LVDT signal conditioner with applications ranging from steam valve position feedback, governor & throttle valves, interceptor & stop valves, boiler feedwater pumps and turbine control systems.

 

It supports a wide range of AC LVDTs and RVDTs, with output non-linearity ≤±0.25% FS. NT-C-5000 simplifies calibration setup with built-in null indicators and front panel pushbutton controls to set up zero and full-scale output, bringing machinery downtime to a minimum. The choice of 4 excitation frequencies and 8 analog outputs with 40dB dynamic range of AC output indicates most common system failures by flashing LED codes.

 

NT-C-5000 LVDT signal conditioner digitally communicates with up to 16 addresses simultaneously via auto-master syncing, where master output couples up to fifteen slave units. If the master should fail,

new master will automatically be generated for fail-safe excitation.

 

Key features of LVC-4000:

• Smart setup with front panel push buttons
• Built-in null indication with front panel LEDs
• Auto-mastering fail-safe excitation syncing for multiple units
• Self-diagnostics for LVDT failure or disconnect
• Digital communications via RS-485 2-wire multi-drop bus
• Hot swapability --- setup can be saved and reloaded via RS-485 port

 

User selectable features:

• +15 to +30 V DC (+24 V nominal), 60 mA max. at 24 V DC; +15 V DC and -15 V DC needed for ±10 V DC bipolar output
• 1 kHz, 3 kHz, 5 kHz, 10 kHz (nominal) excitation frequency
• Master output couples up to fifteen slave units; if master fails, new master is automatically generated for fail-safe excitation

 

Operation environment data:

Operating Temperature: 0 to 75°C

Temperature Sensitivity: +/-0.002% of FSO/C (combined zero and span shift)

 

 

Read less...

To contact Bestech Australia about NewTek Sensor Solutions NT-C-5000- LVDT Signal Conditioner use Get a quote.