Mexx Engineering - Continuous Bottle Turner

Continuous Bottle Turner

Continuous Bottle Turner (Ceiling Mounted)

Continuous Bottle Turner (Floor Mounted)

APPLICATIONS FOR THE CONTINUOUS BOTTLE TURNER

The integration of high-end continuous bottle turner can increase productivity or efficiency within the following industries:

• Food & Beverage
• Packaging & Palletising
• Pharmaceuticals & Neuroceuticals
• Plastics & Moulding

 

KEY FEATURES OF CONTINUOUS BOTTLE TURNER

• Two mounting options available (floor standing or roof hanging)
• The roof hanging kit includes a wired remote control pendant
• The remote control is available separately for floor standing models
• Both mounting options connect to the same base device, so changing the mounting method in the future is as easy as purchasing the appropriate mounting kit
• System safety interlocked and guarded as per Australian and New Zealand Standards

 

WHY INVEST IN A CONTINUOUS BOTTLE TURNER

The continuous bottle turner is designed to reorient bottles on a conveyor line. It comes in two variations where one is roof hanging and the other is floor standing. A remote-access panel can be added as an accessory. This enables the operator to switch the system on and off from a distance.

The machine runs with a series of belts on the neck of the bottle which then engage the bottle with a gentle lead-in and lead-out to spin. The bottleneck is spun so it’s not touching the top only the threads of the cap. It spins the bottle in either 90, 180, or 270 degree angle.

As an example in a bottling plant, a blow moulding system with a two-exit machine (both left and right). It balances extra moulds and the bottles may come with a handle. In some instances, a few handles are facing forward while others are trailing. This may pose a problem within the production line. In an ideal situation, all bottle handles are positioned in one direction. To solve this issue, a bottle turners can be installed at one side of the blow moulder. It will that turn the bottles to a pre-specified orientation as requested by the customer. 

In addition to adjusting the orientation of the bottles, the continuous bottle turner spaces out bottles to provide room for it to spin on the fly. This all happens in one continuous operation, this machine can be programmed to run bottles in fast or slow, it will just keep on spinning all bottles until it is set to the right orientation.

The machine is fully versatile with various scales and readouts. The heights for different bottles, as well as, different widths of bottles neck can be pre-set. It is fully adjustable, all done with wheels so there is no two-link change. These adjustments are calculated with high-precision.

Read more...

To contact Mexx Engineering Pty Ltd about Mexx Engineering Continuous Bottle Turner use Get a quote.

APPLICATIONS FOR THE CONTINUOUS BOTTLE TURNER

The integration of high-end continuous bottle turner can increase productivity or efficiency within the following industries:

• Food & Beverage
• Packaging & Palletising
• Pharmaceuticals & Neuroceuticals
• Plastics & Moulding

 

KEY FEATURES OF CONTINUOUS BOTTLE TURNER

• Two mounting options available (floor standing or roof hanging)
• The roof hanging kit includes a wired remote control pendant
• The remote control is available separately for floor standing models
• Both mounting options connect to the same base device, so changing the mounting method in the future is as easy as purchasing the appropriate mounting kit
• System safety interlocked and guarded as per Australian and New Zealand Standards

 

WHY INVEST IN A CONTINUOUS BOTTLE TURNER

The continuous bottle turner is designed to reorient bottles on a conveyor line. It comes in two variations where one is roof hanging and the other is floor standing. A remote-access panel can be added as an accessory. This enables the operator to switch the system on and off from a distance.

The machine runs with a series of belts on the neck of the bottle which then engage the bottle with a gentle lead-in and lead-out to spin. The bottleneck is spun so it’s not touching the top only the threads of the cap. It spins the bottle in either 90, 180, or 270 degree angle.

As an example in a bottling plant, a blow moulding system with a two-exit machine (both left and right). It balances extra moulds and the bottles may come with a handle. In some instances, a few handles are facing forward while others are trailing. This may pose a problem within the production line. In an ideal situation, all bottle handles are positioned in one direction. To solve this issue, a bottle turners can be installed at one side of the blow moulder. It will that turn the bottles to a pre-specified orientation as requested by the customer. 

In addition to adjusting the orientation of the bottles, the continuous bottle turner spaces out bottles to provide room for it to spin on the fly. This all happens in one continuous operation, this machine can be programmed to run bottles in fast or slow, it will just keep on spinning all bottles until it is set to the right orientation.

The machine is fully versatile with various scales and readouts. The heights for different bottles, as well as, different widths of bottles neck can be pre-set. It is fully adjustable, all done with wheels so there is no two-link change. These adjustments are calculated with high-precision.

Read less...

To contact Mexx Engineering Pty Ltd about Mexx Engineering Continuous Bottle Turner use Get a quote.