Lovato Dual Power Supply | ATLDPS1 ATS

Lovato - Dual Power Supply | ATLDPS1 ATS

Supplier: Mechtric

Dual Power Supply | ATLDPS1 ATS

Lovato ATLDPS1 Automatic Transfer Switch Controllers Dual Power Supply Module

87 Recent Views In Stock

The ATL DPS1 is capable of measuring and controlling voltages at its inputs, selecting the most ideal to connect to the output. It is suitable to supply motorised circuit breakers and changeover switches in automatic switching systems of 2 three phase supply lines.

The two voltage inputs of the module are independent and insulated; each is capable of supplying the internal measuring circuit managed by the micro-controller. It reduces the number of components and improves installation safety.

General Characteristics:

Voltage value selectable via bypass terminals.
Minimum and maximum voltage tripping thresholds.
2 single phase L+N inputs.
1 single phase L+N output.
L1 priority line.
Use with motorised control units powered at 110VAC or 230VAC.
Output voltage monitoring.
Internal relay self-diagnosis.
Indicating LEDs for abnormal conditions and status of inputs and outputs.

Operational Characteristics:

Rated supply voltage: 110…230VAC configurable.
Frequency: 50/60Hz.
Input voltage range: 80…300VAC.
Voltage tripping thresholds min/max 80% and 120% set value.
2 line inputs L1-L2: Single phase, between phase and neutral.
Current output: 4A max.
Priority line: L1 when both input values are within limits.
Fixed delay time between line switching: 0.5s.
4 status indication LEDs for voltage of each line within limits, voltage present at output, relay output anomaly.
Mounting: 35mm DIN rail (IEC/EN 60715) or screw type by means of removable clips.
Modular housing, 3 module.
Protection rating: IP40 on front; IP20 at rear.

Order Code	Description
ATLDPS1	For controlling and selecting supply for motorised breakers/switches, 110…230VAC configurable.

To contact Mechtric about Lovato Dual Power Supply | ATLDPS1 ATS use Get a quote.

General Characteristics:

Voltage value selectable via bypass terminals.
Minimum and maximum voltage tripping thresholds.
2 single phase L+N inputs.
1 single phase L+N output.
L1 priority line.
Use with motorised control units powered at 110VAC or 230VAC.
Output voltage monitoring.
Internal relay self-diagnosis.
Indicating LEDs for abnormal conditions and status of inputs and outputs.

Operational Characteristics:

Rated supply voltage: 110…230VAC configurable.
Frequency: 50/60Hz.
Input voltage range: 80…300VAC.
Voltage tripping thresholds min/max 80% and 120% set value.
2 line inputs L1-L2: Single phase, between phase and neutral.
Current output: 4A max.
Priority line: L1 when both input values are within limits.
Fixed delay time between line switching: 0.5s.
4 status indication LEDs for voltage of each line within limits, voltage present at output, relay output anomaly.
Mounting: 35mm DIN rail (IEC/EN 60715) or screw type by means of removable clips.
Modular housing, 3 module.
Protection rating: IP40 on front; IP20 at rear.

Order Code	Description
ATLDPS1	For controlling and selecting supply for motorised breakers/switches, 110…230VAC configurable.

Read less...

To contact Mechtric about Lovato Dual Power Supply | ATLDPS1 ATS use Get a quote.

Let Mechtric provide you with a quote

Supplier

Get a quote

Supplier: Mechtric

Distribution: Australia and New Zealand

Location: Malaga, WA

Trade With Confidence. The supplier of this item is approved as a Verified Supplier. Business registration, contact details and locations have been verified. Mechtric are also proudly displaying these credentials:

Established:

1964

Employees:

21-50

Distribution:

Australia and New Zealand

Location:

Malaga , WA

Joined:

Jul 2003

Level:

Premium Storefront