Lotos Plasma Cutter | CNC LTP5500

Lotos - Plasma Cutter | CNC LTP5500

Supplier: Josephs Welding

Plasma Cutter | CNC LTP5500

Lotos LTP5500-CNC Plasma cutter, non-touch pilot arc cnc enabled plasma cutter.

In Stock

Features of this product

PORTABLE and POWERFUL–The LTP5500 can easily cut 3/5” (15 mm) metal with ultimate portability weighing only 8kg(15lbs); The LT5500 is an excellent choice for home DIY jobs and light duty small business projects.
CNC ENABLED Pre-installed CNC Interface with THC (Torch Height Controller) signal output. Non-HF Blowback Start, there is no HF interference on your CNC computer.
SETUP WITHIN 1 MIN–the per-installed NPT 1/4” industry type D plug and air filter regulator allows you to quick connect to your air compressor by using the stand coupler existing on your air compressor. The Non-HF start 15ft torch with central connector save your time to connect the torch to your plasma cutter. The whole machine can be setup quickly within 1 min.
INPUT & OUTPUT–Voltage / Frequency (240 V 50/60Hz). 20-55 A DC output, 3/5” ideal clean cut and 1” maximum severance cut under 240V. 20-35A DC output, 3/8″ ideal clean cut and 1/2″ maximum severance cut under 110/120V.
SUITABLE CUTTING–for Stainless Steel, Alloy Steel, Mild Steel, Copper, Aluminum, etc. Uses non-hazardous compressed air to cut, safe and at low cost.
BUY WITH CONFIDENCE: We offer 30 days refund and 12 months Limited Warranty: include 1 Year NEW Replacement Warranty.
FEEL FREE TO CONTACT US–our customer Care team is always ready to help. Naturally, we hope you don’t encounter any problems, but when they crop up, our customer support is there to help! we will provide the Best solution for you.
For any Limited Warranty claim, a valid Proof of Purchase from our Authorized Dealers and a Valid Australia Shipping Address is required. Warranty valid in Australia only and for orders from our authorized dealers.

To contact Josephs Welding about Lotos Plasma Cutter | CNC LTP5500 use Get a quote.

Features of this product

PORTABLE and POWERFUL–The LTP5500 can easily cut 3/5” (15 mm) metal with ultimate portability weighing only 8kg(15lbs); The LT5500 is an excellent choice for home DIY jobs and light duty small business projects.
CNC ENABLED Pre-installed CNC Interface with THC (Torch Height Controller) signal output. Non-HF Blowback Start, there is no HF interference on your CNC computer.
SETUP WITHIN 1 MIN–the per-installed NPT 1/4” industry type D plug and air filter regulator allows you to quick connect to your air compressor by using the stand coupler existing on your air compressor. The Non-HF start 15ft torch with central connector save your time to connect the torch to your plasma cutter. The whole machine can be setup quickly within 1 min.
INPUT & OUTPUT–Voltage / Frequency (240 V 50/60Hz). 20-55 A DC output, 3/5” ideal clean cut and 1” maximum severance cut under 240V. 20-35A DC output, 3/8″ ideal clean cut and 1/2″ maximum severance cut under 110/120V.
SUITABLE CUTTING–for Stainless Steel, Alloy Steel, Mild Steel, Copper, Aluminum, etc. Uses non-hazardous compressed air to cut, safe and at low cost.
BUY WITH CONFIDENCE: We offer 30 days refund and 12 months Limited Warranty: include 1 Year NEW Replacement Warranty.
FEEL FREE TO CONTACT US–our customer Care team is always ready to help. Naturally, we hope you don’t encounter any problems, but when they crop up, our customer support is there to help! we will provide the Best solution for you.
For any Limited Warranty claim, a valid Proof of Purchase from our Authorized Dealers and a Valid Australia Shipping Address is required. Warranty valid in Australia only and for orders from our authorized dealers.

Read less...

To contact Josephs Welding about Lotos Plasma Cutter | CNC LTP5500 use Get a quote.