The edge measuring system includes a laser transmitter and CCD receiver, is totally digital and measurements are independent of temperature, surface texture, colour of sample or dirt on lenses.
Edge Measurement minimises errors due to craters in the sample surface
The station is supplied with a spacer jig for the 100mm samples. When not in use - the spacer is locked to the top of the station so as not to affect the weight readings of the 150mm cube samples
Fitted with weigh feature – eliminates need for a platform scale, and allows all 3 dimensions and weight to be transmitted via one data stream.
Dimensions transmitted in mm as an error value. Self-contained system – measurements can be made manually if PC not available
Manual dimension calibration facility to compensate for wear of mechanical parts
Reference cubes are provided, and button is used to calibrate the station.
Mechanical over travel stops for overload protection
Auto-tare feature for weight – zeroed reading when a sample is removed
Cal-Enable lock on display panel – this allows calibration in the field
The sample is mounted upside down on a hardened centre button and rests at an angle against several hardened side supports, to ensure correct positioning of the sample and ergonomic working location for the operator.
Height is thus measured at the bottom of the meniscus of the "rough end", while the width and height are measured at right angles to one another at the mid-height of the sample.
Hylec Controls | Test Equipment Suppliers and Integrators IndustrySearch Trusted Supplier
Hylec Control was first established in 1979 and initially started operation as a developer and manufacturer of analogue control systems. These were specially customised hydraulic applications, using ...