HMI Touch Panel Operator Interface Panels - Sunlight

Touch screen operator interface panels

Transreflective Tough Panel - SE Series

Four model sizes to choose from

New technology:HMI Touch Panel Low power, less heat.

Tested and proven in the Australian Desert
The outdoor Readability of the Uticor Transreflective Toughpanels has been tested for use in the Australian desert.

New transreflective technology minimises power consumption and heat
The Uticor Transreflective Touchpanels available in 6" and 10" models utilises new transreflective LCD technology, allowing the screen to be visible even under bright outdoor light conditions. The transreflective LCD reflects back the UV component of sunlight.

• Note 1: The specifications of the Uticor Transreflective Toughpanel are identical to the standard Uticor except the Brightness is 500 nits but as stated earlier it’s better than 1000 nits when compared to the standard LCD Technology.
• Note 2: Not available in "SE" Toughpanel models.

There are four models to choose from: 6", 8", 10" and 15" Models.

Features of Transreflective HMI Touch Screen Operator Panel - SE Series

• 4 year warranty
• Robust, NEMA 4X, IP66 Class 1, Div 2, Conformal Coated, Aluminium or Stainless Steel Panels
• Hard surface Touchscreen with built-in Anti-glare film (0.090” thick)
• Exclusive White LED Backlit 10,000 hrs @ 60° C and 95% Humidity
• Displays with high-end brightness (500 Nits for TFT) and wider viewing angle (60°)

Higher Temp. rated Display
HMI Toughpanel displays have a typical rating of 60° C

Longer Life
Toughpanels have the best specifications for backlit 100,000 hours of operation

Specification differences between Standard and SE Series
SE Series has all the features of Standard Toughpanels except the following:

• No Real Time clock
• No Flash Card
• No Industrial Network card
• No NVC card

Other than the above program features and programming software is the same. In addition, "S" model has only serial drivers whereas "SE" models has serial as well as Ethernet drivers with Modbus TCP/IP, Ethernet I/P, GE SRTP and Uticor I/P. Both "S" and "SE" models are capable of both Remote Monitoring and Control though Serial or Ethernet port respectively, using NVC Software.

60° C

Longer Life
Toughpanels have the best specifications for backlit 100,000 hours of operation

Specification differences between Standard and SE Series
SE Series has all the features of Standard Toughpanels except the following:

• No Real Time clock
• No Flash Card
• No Industrial Network card
• No NVC card

Other than the above program features and programming software is the same. In addition, "S" model has only serial drivers whereas "SE" models has serial as well as Ethernet drivers with Modbus TCP/IP, Ethernet I/P, GE SRTP and Uticor I/P. Both "S" and "SE" models are capable of both Remote Monitoring and Control though Serial or Ethernet port respectively, using NVC Software.

Read more...

To contact Uticor AVG about HMI Touch Panel Operator Interface Panels - Sunlight use Get a quote.

New technology:HMI Touch Panel Low power, less heat.

Tested and proven in the Australian Desert
The outdoor Readability of the Uticor Transreflective Toughpanels has been tested for use in the Australian desert.

New transreflective technology minimises power consumption and heat
The Uticor Transreflective Touchpanels available in 6" and 10" models utilises new transreflective LCD technology, allowing the screen to be visible even under bright outdoor light conditions. The transreflective LCD reflects back the UV component of sunlight.

• Note 1: The specifications of the Uticor Transreflective Toughpanel are identical to the standard Uticor except the Brightness is 500 nits but as stated earlier it’s better than 1000 nits when compared to the standard LCD Technology.
• Note 2: Not available in "SE" Toughpanel models.

There are four models to choose from: 6", 8", 10" and 15" Models.

Features of Transreflective HMI Touch Screen Operator Panel - SE Series

• 4 year warranty
• Robust, NEMA 4X, IP66 Class 1, Div 2, Conformal Coated, Aluminium or Stainless Steel Panels
• Hard surface Touchscreen with built-in Anti-glare film (0.090” thick)
• Exclusive White LED Backlit 10,000 hrs @ 60° C and 95% Humidity
• Displays with high-end brightness (500 Nits for TFT) and wider viewing angle (60°)

Higher Temp. rated Display
HMI Toughpanel displays have a typical rating of 60° C

Longer Life
Toughpanels have the best specifications for backlit 100,000 hours of operation

Specification differences between Standard and SE Series
SE Series has all the features of Standard Toughpanels except the following:

• No Real Time clock
• No Flash Card
• No Industrial Network card
• No NVC card

Other than the above program features and programming software is the same. In addition, "S" model has only serial drivers whereas "SE" models has serial as well as Ethernet drivers with Modbus TCP/IP, Ethernet I/P, GE SRTP and Uticor I/P. Both "S" and "SE" models are capable of both Remote Monitoring and Control though Serial or Ethernet port respectively, using NVC Software.

60° C

Longer Life
Toughpanels have the best specifications for backlit 100,000 hours of operation

Specification differences between Standard and SE Series
SE Series has all the features of Standard Toughpanels except the following:

• No Real Time clock
• No Flash Card
• No Industrial Network card
• No NVC card

Other than the above program features and programming software is the same. In addition, "S" model has only serial drivers whereas "SE" models has serial as well as Ethernet drivers with Modbus TCP/IP, Ethernet I/P, GE SRTP and Uticor I/P. Both "S" and "SE" models are capable of both Remote Monitoring and Control though Serial or Ethernet port respectively, using NVC Software.

Read less...

To contact Uticor AVG about HMI Touch Panel Operator Interface Panels - Sunlight use Get a quote.