These series are produced with special materials and alloyed elastic diaphragm together with delicate processing and debugging. The main characteristics are high accuracy and small zero and span shifts caused by changes in process temperatures. The model PT124G-112T/123T comes with a temperature sensor, with type J, K, E optional.
Features
- Easy to install
- Widely measurement ranges
- High accuracy
- Internal 80% calibration
- Interchangeable for other brands
- Excellent stability and repeatability
Specification
| Pressure range | 0-3.5MPa…0-150MPa (0-500psi…20000psi) |
| Over Pressure | 1.5 X FSO |
| Combined Error | ± 0.5% FSO (Including Linearity, Repeatability & Hysteresis) |
| Output | 3.33 mV/V, 2mV/V |
| Input Voltage | 10VDC |
| Repeatability | +/- 0.2%FSO |
| Bridge Resistance Input | 345 Ohms minimum |
| Bridge Resistance Output | 350 Ohms +/- 10% |
| Internal Shunt Calibration (R-Cal) | 80% FSO +/- 1% |
| Insulation Resistance | 200 megohms @ 100 Vdc |
| Max Diaphragm Temperature | 300 ? |
| Mounting Torque | 500 inch/lbs. max. |
| Standard Wetted Parts | Diaphragm coated 15-5 PH SST |
| Electrical connector | 6PIN connector |
| Process connector | 1/2″-20UNF, M14×1.5, M18×1.5 Optional |
