Helix - Tray Sealing Machine | ET-T19LNG

Tray Sealing Machine | ET-T19LNG

Tray Sealing Machine | ET-T19LNG

• Machine seals lidding film etc to trays/tubs 260x320 mm Max. Other sizes available
• With gas flush capability
• Suitable for any sealable trays such as PP. PE. PET. PVC. Cardboard or Foil trays.
• Semi Automatic. Centrally controlled by PLC. All functions controlled from Control Panel
• Sealing jig with profile cut on sealing film ( 2 mm film lip out from tray edge).
• Machine through put around 6 - 8 trays/minute (operator dependent)
• Machine seal and cut controlled pneumatically. Film and jig driven by electric motor.
• Electrical power supply: 240VAC,10A. Compressed air requirement: 600KPa,20L/M.**
• Machine dimension: 500Wx700Dx700H. Machine weight: 65kg.

Product Features

• Table top operation - Stainless steel structure.
• Film length controlled by PE sensor or timing
• Suitable for most 1 kg tray (2 off in one cycle)
• Automatic motion as: in/seal/cut/film unwind/out.
• Fully guarded and safety protected.

Product Options

• Second jig set - top/bottom (Four hole)
• Second jig set - top/bottom.(Twin hole)
• Manual Hot foil date coder.
• Compressor requirement 12CFM.

 

To contact Helix Packaging about Helix Tray Sealing Machine | ET-T19LNG use Get a quote.

Tray Sealing Machine | ET-T19LNG

• Machine seals lidding film etc to trays/tubs 260x320 mm Max. Other sizes available
• With gas flush capability
• Suitable for any sealable trays such as PP. PE. PET. PVC. Cardboard or Foil trays.
• Semi Automatic. Centrally controlled by PLC. All functions controlled from Control Panel
• Sealing jig with profile cut on sealing film ( 2 mm film lip out from tray edge).
• Machine through put around 6 - 8 trays/minute (operator dependent)
• Machine seal and cut controlled pneumatically. Film and jig driven by electric motor.
• Electrical power supply: 240VAC,10A. Compressed air requirement: 600KPa,20L/M.**
• Machine dimension: 500Wx700Dx700H. Machine weight: 65kg.

Product Features

• Table top operation - Stainless steel structure.
• Film length controlled by PE sensor or timing
• Suitable for most 1 kg tray (2 off in one cycle)
• Automatic motion as: in/seal/cut/film unwind/out.
• Fully guarded and safety protected.

Product Options

• Second jig set - top/bottom (Four hole)
• Second jig set - top/bottom.(Twin hole)
• Manual Hot foil date coder.
• Compressor requirement 12CFM.

 

Read less...

To contact Helix Packaging about Helix Tray Sealing Machine | ET-T19LNG use Get a quote.