Hazardous Area Cable Glands | E2W Industrial ...

Hazardous Area Cable Glands | E2W Industrial Cable Gland

Supplier: Pierlite

Hazardous Area Cable Glands, CMP E2W type brass indoor and outdoor cable gland for use with all types of Lead Sheathed and Single Wire Armour (SWA) cable providing anenvironmental seal on the cable inner lead sheath and cable outer sheath.

42 Recent Views Call for more details

Hazardous Area Cable Glands | E2W Industrial Cable Gland

The cable gland provides mechanical cable retention and electrical continuity via the armour termination and also earth bonding of the inner lead covering or lead sheath. A detachable armour cone and Anyway Universal clamping ring arrangement allows the cable to be easily disconnected from the equipment, for maintenance and change out etc. This feature also facilitates remote make-off procedures when the termination is to be conducted in confined spaces or in areas of restricted access.

Separate tightening actions for the inner displacement seal and the armour termination affords maximum control over the pressure applied to the cable inner lead covering.

The CMP E2W range of industrial cable glands is designed and tested to BS 6121:Part 1:1989, meets or surpasses the requirements of EN 50262:1999, and is produced from Brass grade CuZn39Pb3 (CW614N) to EN12168. Other materials including Aluminium are also available in this standard design.

Technical Data

Type
- E2W
Design Specification
- BS 6121:Part 1:1989, EN 50262:1999
EN 50262 Mechanical Classifications
- Retention = Class B, Impact = Level 8,
EN 50262 Electrical Classifications
- Category A without use of an Earth Tag and Category B with an Earth Tag.
Continuous Operating Temperature
- -60°C to +150°C
Ingress Protection Rating
- IP66 (IP67/IP68 also available)
Standard Gland Material
- Electro less Nickel Plated Brass
Alternative Gland Material
- Stainless Steel, Aluminium
Seal Material
- CMP Formulated Thermoplastic Elastomer
Cable Type
- Lead Sheathed & Single Wire Armour (LC/SWA)
Armour Clamping
- Detachable Armour Cone & Anyway Universal Clamping Ring
Sealing Technique
- CMP Inner Displacement Seal & Unique CMP “LRS” ™ Outer Seal (Load Retention Seal)
Sealing Area(s)
- Inner & Outer Sheath
Optional Accessories
- Adaptor/Reducer
- Earth Tag
- Entry Thread Seal
- Locknut
- Serrated Washer
- Shroud

To contact Pierlite about Hazardous Area Cable Glands | E2W Industrial Cable Gland use Get a quote.

Hazardous Area Cable Glands | E2W Industrial Cable Gland

Separate tightening actions for the inner displacement seal and the armour termination affords maximum control over the pressure applied to the cable inner lead covering.

Technical Data

Type
- E2W
Design Specification
- BS 6121:Part 1:1989, EN 50262:1999
EN 50262 Mechanical Classifications
- Retention = Class B, Impact = Level 8,
EN 50262 Electrical Classifications
- Category A without use of an Earth Tag and Category B with an Earth Tag.
Continuous Operating Temperature
- -60°C to +150°C
Ingress Protection Rating
- IP66 (IP67/IP68 also available)
Standard Gland Material
- Electro less Nickel Plated Brass
Alternative Gland Material
- Stainless Steel, Aluminium
Seal Material
- CMP Formulated Thermoplastic Elastomer
Cable Type
- Lead Sheathed & Single Wire Armour (LC/SWA)
Armour Clamping
- Detachable Armour Cone & Anyway Universal Clamping Ring
Sealing Technique
- CMP Inner Displacement Seal & Unique CMP “LRS” ™ Outer Seal (Load Retention Seal)
Sealing Area(s)
- Inner & Outer Sheath
Optional Accessories
- Adaptor/Reducer
- Earth Tag
- Entry Thread Seal
- Locknut
- Serrated Washer
- Shroud