Forklift Scales - WeighSafe 805
The WEIGHSAFE Series has been designed using the latest technology available and includes several state of the art on-board weighing systems that are easy to install and use.
The WEIGHSAFE 805 incorporates a micro-processor based unit connected to the hydraulic lifting system found on lifttrucks or similar machines. A load is placed on the forks and is then accurately weighed by measuring the hydraulic pressure required to raise the load. An electronic sensor measures this pressure. An accuracy of +/-1 to 2% of the lift truck capacity is typically achieved. Designed for heavy industrial use, the lift truck can weigh a load in less than 5 seconds.
This will ensure your shipments will not exceed trailer/truck capacity. Individual weight is displayed as a fixed reading, for up to 6 - 8 seconds when the “WEIGH” key is pressed, using the unique “Digi lock” software.
The WEIGHSAFE 805 will also totalize both weight and number of lifts performed - which are available on simple recall.
Features
SPECIFICATIONS
Constructions Material Enclosure:Stainless Steel
H44 operating range:10ºc to 50ºc ( 14ºF to 130ºF )
Sensor:
Rated Pressure - 3000psi
Burst Pressure - 15,000psi
• Construction 17-4 Stainless Steel
• Operating temp range - 10ºc to 60ºc ( 14ºF to 140ºF )
• Cable length 1.5 metres
Weight:Weighsafe 805 system (1.9kg) - Shipping weight
Display Digits:6 digit 15mm segmented red LED
Dimensions:240mm L x 150mm D x 120mm H - Shipping Dimensions
Power/Voltage:12V DC exceeds automotive power supply transient suppression specifications
Warranty:12 months limited warranty on components only
The Weighsafe 805 System contains the following components:
To contact Switched On I & T Services about Forklift Scales - WeighSafe 805 use Get a quote.
The WEIGHSAFE Series has been designed using the latest technology available and includes several state of the art on-board weighing systems that are easy to install and use.
The WEIGHSAFE 805 incorporates a micro-processor based unit connected to the hydraulic lifting system found on lifttrucks or similar machines. A load is placed on the forks and is then accurately weighed by measuring the hydraulic pressure required to raise the load. An electronic sensor measures this pressure. An accuracy of +/-1 to 2% of the lift truck capacity is typically achieved. Designed for heavy industrial use, the lift truck can weigh a load in less than 5 seconds.
This will ensure your shipments will not exceed trailer/truck capacity. Individual weight is displayed as a fixed reading, for up to 6 - 8 seconds when the “WEIGH” key is pressed, using the unique “Digi lock” software.
The WEIGHSAFE 805 will also totalize both weight and number of lifts performed - which are available on simple recall.
Features
SPECIFICATIONS
Constructions Material Enclosure:Stainless Steel
H44 operating range:10ºc to 50ºc ( 14ºF to 130ºF )
Sensor:
Rated Pressure - 3000psi
Burst Pressure - 15,000psi
• Construction 17-4 Stainless Steel
• Operating temp range - 10ºc to 60ºc ( 14ºF to 140ºF )
• Cable length 1.5 metres
Weight:Weighsafe 805 system (1.9kg) - Shipping weight
Display Digits:6 digit 15mm segmented red LED
Dimensions:240mm L x 150mm D x 120mm H - Shipping Dimensions
Power/Voltage:12V DC exceeds automotive power supply transient suppression specifications
Warranty:12 months limited warranty on components only
The Weighsafe 805 System contains the following components:
More information on Forklift Scales WeighSafe 805 >>
To contact Switched On I & T Services about Forklift Scales - WeighSafe 805 use Get a quote.
Thanks for your help!
Sorry! Unable to submit your request at this time. Please try again later.
Report this product