FMS’s wide range of web guiding (and web tension) products offer many modular combinations to cover virtually all applications.
Closed Loop Control
Edge Sensor: The web guide sensor detect the position of the web
Edge Guide Controller: The web guide controller calulates the deviation form the reference position and drives the steering frame or actuator
Steering Frame/Actuator: The steering frame or actuator adjusts the postion of the web keeping it constantly at the reference point.
US01B/04B Series Ultrasonic Edge Sensors are the ideal choice for the detection of transparent films.
Temperature compensated, microprocessor based Ultrasonic Sensor
2 ms cycle time
24V power supply and 0…10V output
Clear position indicator via LED
Highly linear and insensitive to planarity variations in the material
High speed detection for fast processing
Fast andIn line detection mode, the sensor can handle a solid line, an intermittent line, and also a line that is adjacent to or crossed by a pattern. The sensor can even sense holographic pattern. precise alignment of material edge
AZS01B/04B BlueFlash Optical Edge Sensor for the detection of all opaque materials
High resolution 0.6mm
Shielded optical componenets with band pass filter
2ms cycle time
Superior web guiding performance
Not affected by exterior lighting
High speed detection
Fast and precise alignment of web edge.
DLS2 Line and edge sensor
This versatile sensorethe can detect a solid line, an intermittent line, and also a line that is adjacent to or crossed by a pattern. The DLS2 sensor can even sense holographic patterns.
Line and edge detecting modes
Resolution of 0.06mm
LED position indicator
Compact and robust design
Easy to use and apply
Versatile and dependable
High precision and economical
Accurate alignment to the reference line
Reliable and maintenence free
BKS309 Series Digital Web Guide Controller
Left, right, centre or line guiding
Compass rose control panel
Wall (IP 65), panel or Din rail mount
2 ms cycle time
Plug & play or parameter setup over Ethernet
Powerful, user-friendly and compact
Easy to setup and operate
Precise control at machine speeds
Extremely versatile over a large range of applications
Steering Frames and Actuators
FMS Webmaster BKS015 Ultra Compact Web Guide
The BKS015 is the ultimate choice for narrow web applications. The control unit is integrated into the steering frame and provides superior material control for high speed processing and converting of Narrow Webs
Roller lengths 100-350mm
No programming required
Compact and Robust
Cost effective web guiding
No additions wiring required
Easy to setup and user friendly
Reliable and maintenance free.
FMS Webmaster BKS015 EE Web Guide with External Controller
The BKS015 EE version with external controller is perfect the solution for narrow web applications where the web guide is difficult to access. It has the same features and advantages as above.
FMS Webmaster 020
The steering frames of the FMSwebMASTER 020 series have been specifically developed for use in narrow web applications such as: label printing presses, small slitters and rewinders, film conversions, small packaging lines etc.
Fast and precise positioning through powerful motor design
Roller length from 250 to 600mm
Compact and robust design
Built in Controller can be placed on either side of the steering frame
High precision at high machine speed
Multiple mounting options, left, right, vertical, horizontal, up or down.
Reliable and maintenance free operation
FMS Webmaster BKS 030 Web Guide
The Steering Frames of the BKS 030 series were designed to cover the middle material range with web sizes from 500 to 1700 mm. They are the perfect choice for label printing presses, slitters, re-winders, film conversion and extruding equipment, packaging lines and many other applications.
Backlash free operation
Fast and precise
Option for integrated or external controller
Roller length 600-1800mm
Sleek and sturdy design
Enable high speed processing
Versatile-variety of mounting options
Cost effective and maintenance free
The FMW Webdirector 041/042 has been developed for applicatoins that have long free spans. It design, with the turning poing outside of the steering frame, can correct large deviations in web position.
Fast and precise motioning
Roller length range 500-1600mm
Compact and robust
Fast web processing
Adaptable for a large range of web applications
Reliable, maintenance free operation
Winderglide Type D.3 Actuator 650N Thrust Force, 120 to 200mm steering offset
The Winderglide D.3 is designed to equip medium-sized unwind and rewind stands.
CGB Precision Products is a specialist supplier of super precision ball bearings and related components.
With the world's best products we have been successfully serving applications in aviation, defence, manufacturing, and medical instrumentation for over 35 years.
We are the Australian representatives for top brands such as Barden, FAG, Kaydon & Gamet, Kamatics, Heim, FLURO, PIC Design and Greene Tweed - giving our customers unparallel access to the information, technical specifications and experience they demand.