Fluke - Process Meter | Fluke 789 Price Guide: $2,272 Get latest price

Read more...

To contact Queensland Calibrations about Fluke Process Meter | Fluke 789 use Get a quote.

Fluke 789 ProcessMeter doubles your troubleshooting power and is Fluke Connect-enabled

The Fluke 789 ProcessMeter is the ultimate troubleshooting tool for electricians and instrumentation professionals. It combines the functionality of a loop calibrator with the power of a digital multimeter, and the wireless capabilities of Fluke Connect connectivity with optional IR3000FC module. The 789 has a display that's not only twice as large as the Fluke 787B, but also twice as bright with two levels of backlighting. And its built-in, selectable 250 ohm HART® resistor eliminates the need to carry a separate resistor.

The 789 also has a 24-Volt loop supply, which reduces the need to carry a separate power supply when doing offline transmitter testing. You can add an optional temperature measurement module and the wireless data logging capabilities of the Fluke Connect™ mobile app to log data wirelessly to your smart phone and review it from a remote location. So now process technicians can do a lot more while carrying a lot less.

Other useful features:

• Includes 0% and 100% buttons to toggle between 4 and 20 mA sourcing for a quick span check
• Provides all standard DMM capabilities including frequency measurement to 20 kHz, Min/Max/Average/Hold/Relative modes, and diode test and continuity beeper
• Simultaneous displays mA and % of scale readings
• Provides 20 mA DC current source/loop calibrator/simulator
• Offers manual step (100%, 25%, Coarse, Fine) plus auto step and auto ramp
• Delivers 0.1% dc voltage accuracy and 0.05% dc current accuracy
• Provides 1200 ohm drive capability on mA source
• Offers HART mode setting with loop power and a built-in 250 ohm resistor
• Offers externally accessible fuses and batteries for easy replacement

Fluke 789 ProcessMeter™ Includes:

• Fluke 789 ProcessMeter
• AC175 Alligator Clips
• Four (4) AA 1.5 V alkaline batteries (installed)
• TL71 safety-designed test lead set

Features of the Fluke 789:

• 24 V Loop power supply
• Very large dual display
• Enhanced backlight with 2 brightness settings
• 1200 ohm drive capability on mA source
• HART mode setting with loop power and a built-in 250 ohm resistor
• 0% and 100 % buttons to toggle between 4 and 20 mA sourcing for a quick span check
• Externally accessible fuses for easy replacement
• Infrared-port to process data in FlukeView Forms (V2.1) software

Fluke 789 features that are also included in the Fluke 787:

• Precision 1000 V, 440 mA True-RMS digital multimeter
• 0.1% dc voltage accuracy
• 0.05% dc current accuracy
• Frequency measurement to 20 kHz
• Min/Max/Average/Hold/Relative modes
• Diode Test and Continuity Beeper
• Simultaneous mA and % of scale readout
• 20 mA DC current source / loop calibrator / simulator
• Manual Step (100%, 25%, Coarse, Fine) plus Auto Step and Auto Ramp
• Externally accessible battery for easy battery changes

Safety conformance

Meets 1000 Volt EN61010-1 CAT III standards and 600 Volt EN61010-1 CAT IV standards.

Read less...

To contact Queensland Calibrations about Fluke Process Meter | Fluke 789 use Get a quote.