Fiessler Elektronik and Banner Engineering Safety Light Curtains

Fiessler Elektronik and Banner Engineering Safety Light Curtains

Scanning light curtain MLVT

Several parallel light beams with a beam spacing of 7,5mm are controlled by a single-chip micro controller. One by one, all emitting diodes are checked. Therefore, a verification of the present status all diodes is realized. Via a serial interface, these data can be processed further.

Area of application

• paint shops - controlling of spray guns
• conveyor belts - assorting of cardboard boxes 
• wood industry - classification of trunks

Properties

• parallel scanning - therefore no error of measurement
• high speed scanning, reaction times only 1,2 ms to 10,3ms depending on construcional length
• beam spacing only 7,5 mm (0,29 in.)
• protective system IP 65
• scasnning lentghs 100 mm up to 1900 mm in steps of 100 mm
• operating range 7 m
• small guards/valves directly connectable
• 2 short-circuit-safe non-equivalent semiconductor outputs, PNP, connecting capacity 0,5A/24V
• serial interface (RS343c) for IPC or SPS (optional interface converter)

Serial RS 232C interface. Simple and easy-to-handle connection to SPS or to a PC. 
On reception of a demanding signal issued by thecomputer or by the SPS, the receiver emits the number of the blanked emitting diodes ( or interrupted light beams) in binary code (polling). For special purposes, an interface converter for the conversion of RS 485 to RS 232C or Profibus-DP field bus is available.

Voltage:	24 V DC, +/- 20%, stabilized, max. 200mA
Connection:	integrated plug-in connector with PG9 als traction relief. alternative: marketable connectors.
Temperature of operational area:	-10 °C until 55 °C
Outputs:	PNP, outputs "FREE" and "INTERRUPTED, max. 500mA (short-circuit-safe), RS 485 interface(9600, N,8,1), optional converter to profibus-DP Fied bus/RS 232c
Protective System:	IP 65
Profibusadresse MLPB:	Standard 11 (optionally available with 1-125)

Aluminium-profile, anodized or plastic laminated RAL yellow 1020, end pieces consists of acid proof plastics (polyamide) reinforced by glass globes. Light emerging and reentry areas made of plexiglass, optional solvent-proof silikate glass windows.

 

Read more...

To contact Sensor Measurement about Fiessler Elektronik and Banner Engineering Safety Light Curtains use Get a quote.

Scanning light curtain MLVT

Several parallel light beams with a beam spacing of 7,5mm are controlled by a single-chip micro controller. One by one, all emitting diodes are checked. Therefore, a verification of the present status all diodes is realized. Via a serial interface, these data can be processed further.

Area of application

• paint shops - controlling of spray guns
• conveyor belts - assorting of cardboard boxes 
• wood industry - classification of trunks

Properties

• parallel scanning - therefore no error of measurement
• high speed scanning, reaction times only 1,2 ms to 10,3ms depending on construcional length
• beam spacing only 7,5 mm (0,29 in.)
• protective system IP 65
• scasnning lentghs 100 mm up to 1900 mm in steps of 100 mm
• operating range 7 m
• small guards/valves directly connectable
• 2 short-circuit-safe non-equivalent semiconductor outputs, PNP, connecting capacity 0,5A/24V
• serial interface (RS343c) for IPC or SPS (optional interface converter)

Serial RS 232C interface. Simple and easy-to-handle connection to SPS or to a PC. 
On reception of a demanding signal issued by thecomputer or by the SPS, the receiver emits the number of the blanked emitting diodes ( or interrupted light beams) in binary code (polling). For special purposes, an interface converter for the conversion of RS 485 to RS 232C or Profibus-DP field bus is available.

Voltage:	24 V DC, +/- 20%, stabilized, max. 200mA
Connection:	integrated plug-in connector with PG9 als traction relief. alternative: marketable connectors.
Temperature of operational area:	-10 °C until 55 °C
Outputs:	PNP, outputs "FREE" and "INTERRUPTED, max. 500mA (short-circuit-safe), RS 485 interface(9600, N,8,1), optional converter to profibus-DP Fied bus/RS 232c
Protective System:	IP 65
Profibusadresse MLPB:	Standard 11 (optionally available with 1-125)

Aluminium-profile, anodized or plastic laminated RAL yellow 1020, end pieces consists of acid proof plastics (polyamide) reinforced by glass globes. Light emerging and reentry areas made of plexiglass, optional solvent-proof silikate glass windows.

 

Read less...

To contact Sensor Measurement about Fiessler Elektronik and Banner Engineering Safety Light Curtains use Get a quote.