Centrifugal pumps entirely made of AISI 316 stainless steel according to EN 733 (ex DIN 24255).
SH series pumps are used for water and clean liquid circulation in heating, ventilating and air conditioning systems, and for pressure boosting in industrial applications.
Delivery: up to 240 m3/h
Head: up to 110 m
Power supply: three-phase and single-phase 50 and 60 Hz
Power: 0.25 kW to 75 kW
Maximum operating pressure: 12 bar PN12
Temperature of pumped liquid: -10°C to +120°C
Insulation class: 155 (F)
Open impeller pumps solids: 20mm – 40mm dependant on model
Industrial washing equipment
Cooling and chilling
Pump body: AISI 316 stainless steel
Impeller: AISI 316 stainless steel
Seal holder: AISI 316 stainless steel
Adapter: Aluminium or Cast iron
Mechanical seal: Ceramic/Carbon/FPM
Fill and drain plugs: AISI 316 stainless steel
SHE, SHF, SHS, SHO, SHOE
SHE Close-coupled with special motor shaft extension.
SHS With stub shaft and standard motor.
SHF With shaft extension, support, flexible coupling, base and standard motor according to EN 733 (ex DIN 24255).
Available on request:
different voltages and frequencies
special materials for the mechanical seals and gaskets
SFH with flexible coupling with spacer
version with Hydrovar frequency converter fitted onto either morot or through wall mount system.
Brown Brothers Engineers | Pressure Systems & Industrial Process Pumps
Brown Brothers Engineers was established in 1908 in New Zealand by Alfred and Phillip Brown. In the early years, the company specialised in electrical engineering and diversified into pumps after ...