Economical Digital Force Gauges Series 2 | MARK-10

Economical Digital Force Gauges Series 2 | MARK-10

Economical Digital Force Gauges Series 2 Display Banner

Economical Digital Force Gauges Series 2 Housing

Economical Digital Force Gauges Series 2 with test stand

Series 2 digital force gauges are designed for basic tension and compression force testing applications up to 500 lbF (2,500 N). Peak tension and compression readings are reliably captured via the gauges' ±0.5% accuracy and 500 Hz sampling rate. A backlit graphic LCD displays the current, peak tension, or peak compression reading.

The gauges are overload protected to 200% of capacity. An ergonomic, reversible aluminum housing allows for hand held use or fixture mounting, rugged enough for applications in both production and laboratory environments. Series 2 gauges are directly compatible with Mark-10 test stands and grips.

Calculates peak tension and compression values 3 selectable units of measurement Ultra-compact, ergonomic housing Configurable default measurement unit and mode 500 Hz sampling rate Large, backlit graphic display with auto-dimming Powered by rechargeable battery or AC adapter Reversible housing for alternate load cell orientation

Accuracy:  ±0.5% of full scale Sampling rate:    500 Hz Power:   AC or rechargeable battery. Multi-step low battery indicator is displayed, gauge shuts off automatically when power is too low. Battery life:   Backlight on: up to 7 hours of continuous use  Backlight off: up to 24 hours of continuous use Measurement units:   lbF, kgF, N Safe overload:   200% of full scale (display shows “OVER” at 110% and above) Weight:   M2-2 – M2-100: 0.7 lb [0.33 kg] M2-200 – M2-500: 0.9 lb [0.41 kg] Included items:   AC adapter, rechargeable battery, quick-start guide, resource CD, certificate of conformance Environmental requirements:   40 - 100°F, max. 96% humidity, non-condensating Warranty:   3 years (see individual statement for further details)   A wide range of test stands and gripping fixtures.   Attachments Available individually or as a kit. Select from a hook, flat, cone, chisel, v-groove, and extension rod.   Carrying case Cushioned hard plastic carrying case provides storage space for the gauge, AC adapter, and attachments.   Certificate of calibration Includes 10 data points in the tension and compression directions. NIST-traceable.   Mounting plate For mounting Mark-10 gauges to a fixture or testing system. Includes mounting hardware.  Note: Gauge mounting plates are included with Mark-10 test stands.

Read more...

To contact IDM Instruments about Economical Digital Force Gauges Series 2 | MARK-10 use Get a quote.

Series 2 digital force gauges are designed for basic tension and compression force testing applications up to 500 lbF (2,500 N). Peak tension and compression readings are reliably captured via the gauges' ±0.5% accuracy and 500 Hz sampling rate. A backlit graphic LCD displays the current, peak tension, or peak compression reading.

The gauges are overload protected to 200% of capacity. An ergonomic, reversible aluminum housing allows for hand held use or fixture mounting, rugged enough for applications in both production and laboratory environments. Series 2 gauges are directly compatible with Mark-10 test stands and grips.

Calculates peak tension and compression values 3 selectable units of measurement Ultra-compact, ergonomic housing Configurable default measurement unit and mode 500 Hz sampling rate Large, backlit graphic display with auto-dimming Powered by rechargeable battery or AC adapter Reversible housing for alternate load cell orientation

Accuracy:  ±0.5% of full scale Sampling rate:    500 Hz Power:   AC or rechargeable battery. Multi-step low battery indicator is displayed, gauge shuts off automatically when power is too low. Battery life:   Backlight on: up to 7 hours of continuous use  Backlight off: up to 24 hours of continuous use Measurement units:   lbF, kgF, N Safe overload:   200% of full scale (display shows “OVER” at 110% and above) Weight:   M2-2 – M2-100: 0.7 lb [0.33 kg] M2-200 – M2-500: 0.9 lb [0.41 kg] Included items:   AC adapter, rechargeable battery, quick-start guide, resource CD, certificate of conformance Environmental requirements:   40 - 100°F, max. 96% humidity, non-condensating Warranty:   3 years (see individual statement for further details)   A wide range of test stands and gripping fixtures.   Attachments Available individually or as a kit. Select from a hook, flat, cone, chisel, v-groove, and extension rod.   Carrying case Cushioned hard plastic carrying case provides storage space for the gauge, AC adapter, and attachments.   Certificate of calibration Includes 10 data points in the tension and compression directions. NIST-traceable.   Mounting plate For mounting Mark-10 gauges to a fixture or testing system. Includes mounting hardware.  Note: Gauge mounting plates are included with Mark-10 test stands.

Read less...

To contact IDM Instruments about Economical Digital Force Gauges Series 2 | MARK-10 use Get a quote.