Druck - Pressure Sensor | UNIK 5600/5700 Get latest price

Read more...

To contact Instrowest Pty Ltd about Druck Pressure Sensor | UNIK 5600/5700 use Get a quote.

The Druck UNIK 5600/5700 marine certified pressure sensor ranges from 70 mbar to 700 bar and an accuracy to ±0.04% Full Scale (FS).

The new UNIK 5600/5700 carries marine certification for most zones on-board ship, as well as Intrinsically Safe certifications. Marine approval means UNIK 5000 complies with International standards, regulations, and Marine Law.

The use of Druck silicon technology and analogue circuitry enables best-in-class performance for stability, low power, and high-frequency response. The platform enables you to build up your sensor to match your precise needs. This high-performance, configurable solution to pressure measurement employs modular design and lean manufacturing techniques to offer.

Technical Specifications:

• Ranges from 70 mbar (1 psi) to 700 bar (10,000 psi) (Depending on material option)
• Accuracy to ±0.04% Full Scale (FS) Best Straight Line (BSL)
• Stainless Steel 316L and Titanium construction options
• Frequency response to 3.5 kHz
• High overpressure capability
• Intrinsically Safe Hazardous Area certification
• 4-20 mA output
• Multiple pressure connector options
• DIN 43650 or fully submersible electrical connection
• Operating temperature ranges from –40 to 80°C (-40 to 176°F)

Gauge ranges

• Any zero-based range between 70 mbar and 70 bar (1 to 1,000 psi) (values in psi are approximate)

Sealed Gauge Ranges

• Any zero-based range between 10 and 700 bar (145 to 10,000 psi) (Titanium option limited to 70 bar)

Absolute Ranges

• Any zero-based range between 100 mbar and 700 bar (1.5 to 10,000 psi) (Titanium option limited to 70 bar) Differential Ranges (Stainless Steel option only)
• Wet/Dry Uni-directional or bi-directional 70 mbar to 35 bar (1 to 500 psi)
• Wet/Wet Uni-directional or bi-directional 350 mbar to 35 bar (5 to 500 psi) Line pressure: 70 bar max (1,000 psi)

Enclosure Materials

• Stainless steel or titanium (body – material option), glass-filled nylon (DIN connector assembly) with rubber seals (nitrile O-rings and silicone gaskets). PTFE (depth cone, vent filter), PVDF (cable sheath and depth cone -- depth cable assembly), and TPE-U (cable sheath and depth cone -- depth cable assembly).

Pressure Connector

• • G1/4 Female*
• • G1/4 Male Flat
• • G1/2 Male via Adaptor*
• • 1/4 NPT Male
• • 1/2 NPT Male via Adaptor*
• • M20 X 1.5 Male
• • Depth Cone (G1/4 female open face)

Read less...

To contact Instrowest Pty Ltd about Druck Pressure Sensor | UNIK 5600/5700 use Get a quote.