Conveyor Rollers | Itoh Denki 24v Powered ...
Motor driven rollers (MDR) are conveyor rollers with an internal motor. Each roller controls a small zone of slave-driven rollers meaning they are perfect for zero pressure accumulation. The F-Rat transfer is a high speed 90 degree 24v transfer.
Motor driven rollers (MDR) are conveyor rollers with an internal motor. Each roller controls a small zone of slave-driven rollers meaning they are perfect for zero pressure accumulation (ZPA). Being 24v, they are safe and energy efficient.
Dyno is a trusted Itoh partner. Itoh Denki’s products are designed and manufactured in Japan. They maintain a high level of product by rigorous quality control and ISO9001 certification.
• Energy Savings - In a typical MDR system, the rollers in any given zone only run 10% to 50% of operational time. You could realize energy savings from 30% to 70%.
• Easy to control - Functions such as zone accumulation logic, sensor signal I/O connectivity, acceleration/deceleration time setting are available on the driver cards which enables less time for the control and wiring.
• Easy Installation - electrically pre-wired. A typical section will utilize plug connectors at each end to allow the unit to be set in place and simply plugged into the unit in front of it and the unit behind it to make it operational. You can add or remove sections of conveyor.
• Low Maintenance Cost - conveyors only run as needed (ZPA) meaning there’s less wear and tear to the components.
• Safety - Motor and gear box are built into the tube in addition to DC24V - Low voltage its safe and easy to handle.
• Upgrading existing gravity conveyors
• Powered curves, transfers
• ZPA (Zero Pressure Accumulation)
• Limited space or floor mounted applications
• Office space, mail room, noise sensitive environments
• Weigh scale conveyor
• Workstation conveyor
Operating at a safe low voltage the F-RAT will transfer your product quickly, quietly and smoothly. Easily configurable, it can shift product forwards and backwards, left and right. Being a complete unit means easy integration within any conveyor to upgrade and automate transferring and sorting of product.
• Height of product never changes thanks to our patented simultaneous lift/lower technology
• Ability to move product in four different directions
• Safe, low voltage, 24v DC power
• Transfers product up to 50kg's
• No pneumatics needed, powered rollers control all lifting
• Run-On-Demand feature increases energy savings over traditional transfers
• Fits into existing conveyor frames
• Quieter than traditional pneumatic transfers
Contact Supplier for more information
|
Need more information? Message Dyno Conveyors via the form, or call and say you found them on IndustrySearch so they can best assist you.
Thanks for your help!
Sorry! Unable to submit your request at this time. Please try again later.
Report this product