RTI - Conveyor Belt Weighers | Accuweigh

Conveyor Belt Weighers | Accuweigh

Available in two (2), four (4), and six (6) idler configurations, the Accuweigh® incorporates an advanced counter-balance design ensuring very high precision, even in difficult weighing situations such as applications which feature:

• light belt loadings
• low bulk density products
• widely varying feed rates where a large dynamic operating range is essential
• wide belts
• high capacity applications operating at fast belt speeds
• very thick belts
• steep troughing angles
• high belt tension areas

The Accuweigh® load sensor assembly incorporates overload protection and protection against mechanical shock.  The weigher is supplied with a simple-to-operate on-board test weight.  This allows calibration checks to be easily conducted to determine the as-found-error (AFE), thus ensuring that the weigher remains accurate.

Depending on the specifics of the application and the degree of accuracy required either the two (2), four (4), or six (6) idler weigh frame model will be suitable.   An accuracy of 0.25-0.5% of design capacity is typically achieved.

 

To contact Real Time Instruments about RTI Conveyor Belt Weighers | Accuweigh use Get A Quote.

Available in two (2), four (4), and six (6) idler configurations, the Accuweigh® incorporates an advanced counter-balance design ensuring very high precision, even in difficult weighing situations such as applications which feature:

• light belt loadings
• low bulk density products
• widely varying feed rates where a large dynamic operating range is essential
• wide belts
• high capacity applications operating at fast belt speeds
• very thick belts
• steep troughing angles
• high belt tension areas

The Accuweigh® load sensor assembly incorporates overload protection and protection against mechanical shock.  The weigher is supplied with a simple-to-operate on-board test weight.  This allows calibration checks to be easily conducted to determine the as-found-error (AFE), thus ensuring that the weigher remains accurate.

Depending on the specifics of the application and the degree of accuracy required either the two (2), four (4), or six (6) idler weigh frame model will be suitable.   An accuracy of 0.25-0.5% of design capacity is typically achieved.

 

Read less...

To contact Real Time Instruments about RTI Conveyor Belt Weighers | Accuweigh use Get A Quote.