Sherwood - CNC Spindle Machining | CNC-2200-KIT Price Guide: $1,099 Get latest price

CNC Spindle Machining | CNC-2200-KIT

In Stock

Features of this product

• All brush-type routers are designed for a normal lifespan of approximately 1,000 working hours.
• CNC spindles are designed for a lifespan of 10,000 working hours before a major overhaul or replacement is required. 
• Even the quietest of standard routers is noisy, a CNC spindle on the other hand runs whisper quiet. Most noise is generated only when the bit engages with the workpiece.
• It comes standard with an external inverter - you can turn it on and off and adjust the speed remotely as standard.
• The inverter converts standard single-phase 240V to three-phase 415V 2.2kW power - to handle ANY routing cut.
• The electronic inverter maintains maximum torque literally from 0 - 24,000rpm. 
• The spindle uses industry-standard ER20 collets, so with a full collet set, you can run any bit with a shank size 2 - 13mm. The spindle comes standard with 12-13mm collet to run normal 1/2in shank bits.
• The spindle is water-cooled - meaning it can run all day, every day without variation, regardless of ambient temperature.
• The collet sits at a comfortable distance to ensure the above-table bit changes straight out of the box. 

Read more...

To contact Timbecon about Sherwood CNC Spindle Machining | CNC-2200-KIT use Get a quote.

Features of this product

• All brush-type routers are designed for a normal lifespan of approximately 1,000 working hours.
• CNC spindles are designed for a lifespan of 10,000 working hours before a major overhaul or replacement is required. 
• Even the quietest of standard routers is noisy, a CNC spindle on the other hand runs whisper quiet. Most noise is generated only when the bit engages with the workpiece.
• It comes standard with an external inverter - you can turn it on and off and adjust the speed remotely as standard.
• The inverter converts standard single-phase 240V to three-phase 415V 2.2kW power - to handle ANY routing cut.
• The electronic inverter maintains maximum torque literally from 0 - 24,000rpm. 
• The spindle uses industry-standard ER20 collets, so with a full collet set, you can run any bit with a shank size 2 - 13mm. The spindle comes standard with 12-13mm collet to run normal 1/2in shank bits.
• The spindle is water-cooled - meaning it can run all day, every day without variation, regardless of ambient temperature.
• The collet sits at a comfortable distance to ensure the above-table bit changes straight out of the box. 

Read less...

To contact Timbecon about Sherwood CNC Spindle Machining | CNC-2200-KIT use Get a quote.