Cigweld - Plasma Cutter System | CutSkill 60 Price Guide: $1,599

Plasma Cutter System | CutSkill 60

CIGWELD has now officially changed plasma cutting forever, with the launch of the new range of CutSkill Manual Plasma machines. CutSkill 60 machines from CIGWELD feature a user interface that not only incorporates the latest in colour LCD technology, but also simplifies the entire cutting set up process. 

Features:

• Fully Compliant to AS 60974.1-2006. Enclosure rated to IP23S.
• 2.8” Colour LCD Screen Allows for full interactive digital control
• Air Compressor Recommended air compressor required: Cutskill 35 & 45 - 730kPa,12 CFM Cutskill 60 - 800kPa,12 CFM
• CutSkill 60A Plasma Torch
• Gouging Tip Gouging Tip 1.1mm

Specifications:

• Power: 240V, 1Ph, PFC, 15A Minimum recommended circuit breaker is 2
• Duty Cycle: 20% @ 60A**
• Current range: 20-60 Amps
• Input Air Required: 800kPa, 110LPM
• Generator required: 15kVA
• Mid Steel clean cut: 20mm
• Mild steel severance: 28mm
• Stainless clean cut: 14mm
• Aluminium clean cut: 12mm
• Dimensions (L x W x H): 437mm x 176mm x 324mm
• Weight: 13.2kg

Warranty:

• 3 Year warranty covered by Cigweld

To contact Sydney Tools about Cigweld Plasma Cutter System | CutSkill 60 use Get A Quote.

CIGWELD has now officially changed plasma cutting forever, with the launch of the new range of CutSkill Manual Plasma machines. CutSkill 60 machines from CIGWELD feature a user interface that not only incorporates the latest in colour LCD technology, but also simplifies the entire cutting set up process. 

Features:

• Fully Compliant to AS 60974.1-2006. Enclosure rated to IP23S.
• 2.8” Colour LCD Screen Allows for full interactive digital control
• Air Compressor Recommended air compressor required: Cutskill 35 & 45 - 730kPa,12 CFM Cutskill 60 - 800kPa,12 CFM
• CutSkill 60A Plasma Torch
• Gouging Tip Gouging Tip 1.1mm

Specifications:

• Power: 240V, 1Ph, PFC, 15A Minimum recommended circuit breaker is 2
• Duty Cycle: 20% @ 60A**
• Current range: 20-60 Amps
• Input Air Required: 800kPa, 110LPM
• Generator required: 15kVA
• Mid Steel clean cut: 20mm
• Mild steel severance: 28mm
• Stainless clean cut: 14mm
• Aluminium clean cut: 12mm
• Dimensions (L x W x H): 437mm x 176mm x 324mm
• Weight: 13.2kg

Warranty:

• 3 Year warranty covered by Cigweld

Read less...

To contact Sydney Tools about Cigweld Plasma Cutter System | CutSkill 60 use Get A Quote.