Carbide Burrs

Carbide Burrs

Carbide Burrs

Carbide Burrs

Range: HF100B

• Properties: Cylindrical burr with end-cut. Designation in accordance with DIN 8032: ZYAS
• Advantages: The end-cut makes it suitable for blind holes and faces on inner contours.
• Diameters: 6mm to 12.7mm
• Height: 18mm to 25mm
• Shaft diameter: 6mm, 6.35mm

Range: HF100C

• Properties: Cylindrical burr with ball end. Designation in accordance with DIN 8032: WRC
• Advantages: For universal use on surfaces, contours and radiuses.
• Diameters: 6mm to 12.7mm
• Height: 18mm to 25mm
• Shaft diameter: 6mm, 6.35mm

Range: HF100F

• Properties: Semicircular burr. Designation in accordance with DIN 8032: RBF
• Advantages: Well suited for working on molded parts.
• Diameters: 6mm to 12.7mm
• Height: 18mm to 25mm
• Shaft diameter: 6mm, 6.35mm

Range: HF100G

• Properties: Pointed arch-shaped burr with flattened tip. Designation in accordance with DIN 8032: SPG
• Advantages: Ideal for chamfering. For deburring bore holes.
• Diameters: 6mm to 12.7mm
• Height: 18mm to 25mm
• Shaft diameter: 6mm, 6.35mm

Range: HF100H

• Properties: Flame-shaped burr. No designation in accordance with DIN8032.
• Advantages: Well suited for working on molded parts..
• Diameters: 8mm
• Height: 19mm
• Shaft diameter: 6mm

Range: HF100L

• Properties: Conical round-nosed burr. Designation in accordance with DIN8032: KEL.
• Advantages: For difficult-to-access areas..
• Diameters: 6mm - 12.7mm
• Height: 18mm - 32mm
• Shaft diameter: 6mm, 6.35mm
  

Read more...

To contact Klingspor Australia Pty Ltd. about Carbide Burrs use Get A Quote.

Range: HF100B

• Properties: Cylindrical burr with end-cut. Designation in accordance with DIN 8032: ZYAS
• Advantages: The end-cut makes it suitable for blind holes and faces on inner contours.
• Diameters: 6mm to 12.7mm
• Height: 18mm to 25mm
• Shaft diameter: 6mm, 6.35mm

Range: HF100C

• Properties: Cylindrical burr with ball end. Designation in accordance with DIN 8032: WRC
• Advantages: For universal use on surfaces, contours and radiuses.
• Diameters: 6mm to 12.7mm
• Height: 18mm to 25mm
• Shaft diameter: 6mm, 6.35mm

Range: HF100F

• Properties: Semicircular burr. Designation in accordance with DIN 8032: RBF
• Advantages: Well suited for working on molded parts.
• Diameters: 6mm to 12.7mm
• Height: 18mm to 25mm
• Shaft diameter: 6mm, 6.35mm

Range: HF100G

• Properties: Pointed arch-shaped burr with flattened tip. Designation in accordance with DIN 8032: SPG
• Advantages: Ideal for chamfering. For deburring bore holes.
• Diameters: 6mm to 12.7mm
• Height: 18mm to 25mm
• Shaft diameter: 6mm, 6.35mm

Range: HF100H

• Properties: Flame-shaped burr. No designation in accordance with DIN8032.
• Advantages: Well suited for working on molded parts..
• Diameters: 8mm
• Height: 19mm
• Shaft diameter: 6mm

Range: HF100L

• Properties: Conical round-nosed burr. Designation in accordance with DIN8032: KEL.
• Advantages: For difficult-to-access areas..
• Diameters: 6mm - 12.7mm
• Height: 18mm - 32mm
• Shaft diameter: 6mm, 6.35mm
  

Read less...

To contact Klingspor Australia Pty Ltd. about Carbide Burrs use Get A Quote.