Beamex - Calibration Pumps | Beamex
The pump is ideal in industries where accurate, low-pressure generation is needed, such as the pharmaceutical industry. The PGHP pump is a pneumatic, high-pressure generator with air as the pressure medium. This pump is a practical, high-quality solution in calibrations where using liquids is forbidden, such as the gas industry.
The new pumps complete Beamex's range of pressure generation equipment.
"Beamex is now able to supply a complete range of user-friendly calibration pumps for a broader range of pressure calibration applications," Beamex's Product Manager, Heikki Laurila, describes.
The PGPH is a hand-operated, pneumatic, (uses air as the pressure medium) high-pressure calibration pump for table-top use. The pump is extremely efficient in generating pressure up to 140 bar (2,000 psi) quickly and effortlessly.
It takes far less than a minute to reach the maximum pressure. The PGPH is also able to generate vacuum. It is equipped with a fine-adjustment control providing excellent fine-tuning of generated pressure, and two hand-tightened connectors allowing fast and easy connections without the need for any tools.
The PGL is a hand-operated calibration pump for low pressure using air as its pressure medium. The pressure range of the PGL is ±400 mbar / ±160 iwc.
The pump is equipped with an isothermal bellows chamber for reducing possible environmental temperature changes during the calibration process. With the screw-operated volume control and fine adjustment, an extremely accurate and stable pressure adjustment is possible, enabling attunement to 0.1 Pa.
Need more information? Message AMS Instrumentation & Calibration via the form, or call and say you found them on IndustrySearch so they can best assist you.
The pump is ideal in industries where accurate, low-pressure generation is needed, such as the pharmaceutical industry. The PGHP pump is a pneumatic, high-pressure generator with air as the pressure medium. This pump is a practical, high-quality solution in calibrations where using liquids is forbidden, such as the gas industry.
The new pumps complete Beamex's range of pressure generation equipment.
"Beamex is now able to supply a complete range of user-friendly calibration pumps for a broader range of pressure calibration applications," Beamex's Product Manager, Heikki Laurila, describes.
The PGPH is a hand-operated, pneumatic, (uses air as the pressure medium) high-pressure calibration pump for table-top use. The pump is extremely efficient in generating pressure up to 140 bar (2,000 psi) quickly and effortlessly.
It takes far less than a minute to reach the maximum pressure. The PGPH is also able to generate vacuum. It is equipped with a fine-adjustment control providing excellent fine-tuning of generated pressure, and two hand-tightened connectors allowing fast and easy connections without the need for any tools.
The PGL is a hand-operated calibration pump for low pressure using air as its pressure medium. The pressure range of the PGL is ±400 mbar / ±160 iwc.
The pump is equipped with an isothermal bellows chamber for reducing possible environmental temperature changes during the calibration process. With the screw-operated volume control and fine adjustment, an extremely accurate and stable pressure adjustment is possible, enabling attunement to 0.1 Pa.
Need more information? Message AMS Instrumentation & Calibration via the form, or call and say you found them on IndustrySearch so they can best assist you.
Thanks for your help!
Sorry! Unable to submit your request at this time. Please try again later.
Report this product