Msa & Petzl & Pacific Helmets Nz Rescue & Safety Helmet Suppliers

The standard for rescue and safety helmets in Australia is AS/NZS 1801:199 This standard sets out the requirements for protective helmets used in industrial, construction, mining, and emergency services applications. The standard covers features such as impact resistance, penetration resistance, electrical insulation, and chin strap retention. Helmets that meet this standard are designed to provide protection against head injuries in hazardous work environments. It is recommended that helmets be regularly inspected and replaced if damaged or after a certain period of use.

Choosing the right size rescue and safety helmet is important for ensuring proper protection and comfort. Here are some steps to follow:

• Measure your head circumference using a measuring tape. Start at the forehead, just above the eyebrows, and wrap the tape around the widest part of the head.
• Consult the manufacturer's sizing chart to determine the appropriate helmet size for your head circumference. Make sure to choose a helmet that corresponds to your exact measurements.
• Try on the helmet to ensure a proper fit. The helmet should fit snugly on the head without being too tight or too loose. It should also sit level on the head, with the front edge just above the eyebrows.
• Adjust the helmet's internal suspension system, if applicable, to customize the fit. Most rescue and safety helmets come with adjustable straps or pads that can be tightened or loosened to achieve a comfortable and secure fit.
• Wear the helmet for a few minutes to assess its comfort and functionality. Make sure it does not cause any discomfort or pressure points, and that it allows for a full range of motion and visibility.

By following these steps, you can ensure that you choose the right size rescue and safety helmet for your needs.

Rescue and safety helmets are suitable for a wide range of activities, including:

• Industrial work: Workers in construction, mining, and other industrial settings often wear safety helmets to protect their heads from falling objects and other hazards.
• Search and rescue: Rescue teams often wear helmets to protect their heads while they search for and rescue people in dangerous situations.
• Firefighting: Firefighters wear helmets to protect their heads from falling debris and other hazards while fighting fires.
• Rock climbing: Climbers wear helmets to protect their heads in case of a fall or if they hit their head on a rock.
• Cycling: Cyclists wear helmets to protect their heads in case of a fall or collision.
• Skiing and snowboarding: Skiers and snowboarders wear helmets to protect their heads in case of a fall or collision.
• Whitewater rafting and kayaking: Rafters and kayakers wear helmets to protect their heads in case of a capsized boat or collision with rocks.

Overall, rescue and safety helmets are essential for any activity that involves a risk of head injury.

Rescue and safety helmets are typically made of high-impact resistant materials such as polycarbonate, ABS plastic, or a combination of both. These materials are designed to provide protection against impact and penetration while also being lightweight and comfortable to wear. The interior of the helmet may have padding and a suspension system to absorb shock and provide a secure fit. Some helmets may also have additional features such as a visor, chin strap, or ear protection to further enhance safety. The specific materials and construction of a rescue and safety helmet will vary depending on the intended use and the requirements of the industry or organization using them.

Proper maintenance and care of your rescue and safety helmet are crucial for ensuring its longevity and effectiveness. Here are some tips for maintaining and caring for your helmet:

• Clean your helmet regularly: Use mild soap and water to clean the exterior of your helmet. Avoid using harsh chemicals or solvents that can damage the helmet's surface.
• Inspect your helmet: Check your helmet for any cracks, dents, or other signs of damage. If you find any damage, replace your helmet immediately.
• Store your helmet properly: Keep your helmet in a cool, dry place away from direct sunlight and heat sources. Avoid storing your helmet in a damp or humid environment.
• Replace your helmet when necessary: Helmets have a limited lifespan and need to be replaced after a certain period. Check the manufacturer's instructions for the recommended lifespan of your helmet.

Follow manufacturer's instructions: Always follow the manufacturer's instructions for proper care and maintenance of your helmet. This will ensure that your helmet is properly maintained and cared for and will function effectively in case of an emergency.

Impact resistance: The helmet should be able to withstand impact and protect your head from injury.

• Durability: The helmet should be durable and able to withstand wear and tear.
• Comfort: The helmet should fit comfortably and securely, with adjustable straps and padding.
• Ventilation: The helmet should have adequate ventilation to keep you cool and comfortable during use.
• Light weight: The helmet should be lightweight so that it doesn't add extra weight to your head.
• Reflective materials: The helmet should have reflective materials to increase visibility in low-light conditions.
• Compatibility: The helmet should be compatible with other safety equipment, such as goggles or face shields.
• Certification: The helmet should be certified by a reputable safety organization, such as ANSI or OSHA.
• Accessory compatibility: The helmet should be compatible with accessories such as ear muffs, communication devices, or lights.

Easy to clean: The helmet should be easy to clean and disinfect after use.

The cost of a quality rescue and safety helmet can vary widely depending on the brand, features, and level of protection. Generally, a basic rescue and safety helmet can cost between $50 to $100. However, if you are looking for a more advanced helmet with features such as integrated lights, communication systems, or a higher level of protection, the cost can range from $200 to $1000 or more. It's important to invest in a high-quality helmet that meets safety standards and provides adequate protection for your specific task or activity.

Yes, it is possible to customize your rescue and safety helmet with additional accessories such as chin straps, visors, ear protection, and communication devices. However, it is important to ensure that the accessories are compatible with your helmet and meet safety standards set by relevant regulatory bodies. It is also important to follow manufacturer's instructions for installation and use of the accessories to ensure maximum safety and effectiveness.

In the United States, there are no federal regulations specifically for rescue and safety helmets. However, helmets used for certain activities, such as industrial work or bicycling, may fall under specific regulations. It is important to follow the manufacturer's instructions and any applicable industry or activity-specific guidelines. Additionally, it is important to ensure that the helmet is properly fitted and maintained to ensure maximum protection.