Bronkhorst VDM Evaporator | SW-100

Bronkhorst - VDM Evaporator | SW-100

Supplier: AMS Instrumentation & Calibration

VDM Evaporator | SW-100

Bronkhorst® model SW-100 VDM All-In-One Vapour Delivery Modules are suited for precise vapour flow delivery, composed by mixing up to 30 g/h H2O (32 g/h IPA) with max. 4 ln/min of carrier gas at operating pressures between vacuum and 10 bar.

24 Recent Views In Stock

The VDM incorporates the components of a Bronkhorst^® CEM-System and more! Besides gas and liquid flow controllers and the temperature controlled evaporator, the module features integrated power supply with display (1,8"TFT) and control functions. As an option, the unit offers local or remote trace heating temperature control.

Key Features:

Accurately controlled gas/liquid mixture
Pre-tested, safe and ready to use
High reproducibility
Very stable vapour flow

Specifications:

Performance
Ambient temperature	5...40°C
Max. heating temperature	200°C
Heater capacity	10 W

Mechanical /Electrical specifications
Material (wetted parts)	stainless steel 316L or comparable
Pressure rating	10 bar(g)
Process connections	Gas and liquid inlet: compression type or face seal couplings; Vapour outlet: 1/4" tube (other options on request)
Purge outlet	1/8" OD compression type or 1/8" face seal male
Seals	Viton^®/Kalrez^®; other on request
Plungers	Kalrez^®
Display	1,8" (TFT technology)
Mains supply inlet	IEC 60320-1/C20 male socket with on/off switch, 230 V / 115 V; 50 Hz / 60 Hz
Power consumption	max. 250 VA; add 300 VA for optional tracing control
Electrical connection	FLOW-BUS (2 x RJ45 connector) or RS232 (1 x 9-pin sub-D connector); Optional: Pt100-connection (1 x 4-pin M12 male, a-coded); Optional: IEC 60320-2-2/C13 female tracing outlet

To contact AMS Instrumentation & Calibration about Bronkhorst VDM Evaporator | SW-100 use Get a quote.

Key Features:

Accurately controlled gas/liquid mixture
Pre-tested, safe and ready to use
High reproducibility
Very stable vapour flow

Specifications:

Performance
Ambient temperature	5...40°C
Max. heating temperature	200°C
Heater capacity	10 W

Mechanical /Electrical specifications
Material (wetted parts)	stainless steel 316L or comparable
Pressure rating	10 bar(g)
Process connections	Gas and liquid inlet: compression type or face seal couplings; Vapour outlet: 1/4" tube (other options on request)
Purge outlet	1/8" OD compression type or 1/8" face seal male
Seals	Viton^®/Kalrez^®; other on request
Plungers	Kalrez^®
Display	1,8" (TFT technology)
Mains supply inlet	IEC 60320-1/C20 male socket with on/off switch, 230 V / 115 V; 50 Hz / 60 Hz
Power consumption	max. 250 VA; add 300 VA for optional tracing control
Electrical connection	FLOW-BUS (2 x RJ45 connector) or RS232 (1 x 9-pin sub-D connector); Optional: Pt100-connection (1 x 4-pin M12 male, a-coded); Optional: IEC 60320-2-2/C13 female tracing outlet

Read less...

To contact AMS Instrumentation & Calibration about Bronkhorst VDM Evaporator | SW-100 use Get a quote.

Let AMS Instrumentation & Calibration provide you with a quote

Supplier

Get a quote

Supplier: AMS Instrumentation & Calibration

Distribution: Australia, New Zealand, Pacific Islands

Location: Boronia, VIC

Customers: BHP, Santos, Shell, Australian Navy, Coca Cola, CSL, ANSTO, Rio Tinto, FMG, Oil Search

Trade With Confidence. The supplier of this item is approved as a Verified Supplier. Business registration, contact details and locations have been verified. AMS Instrumentation & Calibration are also proudly displaying these credentials:

Established:

1973

Employees:

21-50

Customers:

BHP, Santos, Shell, Australian Navy, Coca Cola, CSL, ANSTO, Rio Tinto, FMG, Oil Search

Memberships:

IICA, Metrology MSA, ISA

Certifications:

ISO9001

Distribution:

Australia, New Zealand, Pacific Islands