BP163060LO Profiled Safety Support | Heavy Duty Cribbing

BP163060LO Profiled Safety Support | Heavy Duty Cribbing

The BP163060LO jacking and support blocks are used on large heavy stabilisation applications. Able to hold huge weights the blocks are active blocking products used when a person is working on or near a structure or work piece being stabilised. Blox Safety Supports are fit for purpose load rated stabilising blocks with a working load limit (WLL) of 12MPa - 122kg / cm2 – 1740psi at 25°C. The BP163060LO has a maximum capacity of 219,600 kg with the load being spread evenly across the bearing area of the block.

 

The cup and cone profile provide positive interlocking when the blocks are stacked and the top block of a stack can be flipped to provide a flat surface for jacking. Blox come in a high visibility orange colour with handy carry lanyards. They are excellent for use as a single jacking block or in solid cribbing stacks with huge load bearing capacity.

• Certified load rated capacity
• Working Load Limit (WLL)* 122kg/cm2
• Tested under the guidance of AS1170.0.2002 and AS2498.3.1998
• Comprehensive Technical Data Sheets (TDS) available
• 100% recycled high density polyethylene (HDPE) construction for durability
• Lightweight
• Resistant to fuels, oils and most common chemicals
• Will not splinter or rot
• Non-conductive
• Sturdy lanyard for ease of handling
• Operating Temperature range -40°C to +75°C
• 50 year warranty against splitting, rotting, absorption, termites and mould

* Total Block Working Load Limit (WLL) is based on a full press load evenly distributed across the top and bottom surfaces of the safety support/cribbing block.

Warning: Always perform your own risk assessment before using this product. Always know the weight of the equipment or machine being supported. Consult your equipment and machinery manufacturer manual and guidelines for recommended blocking and lifting points. Never exceed the maximum WLL. Under no circumstances does the WLL mentioned above take into consideration point loading or uneven weight distribution of the supported load. Copies of Technical Data Sheets can be obtained by emailing info@safetymits.com or calling 02 9838 8887.

Read more...

To contact Safety MITS about BP163060LO Profiled Safety Support | Heavy Duty Cribbing use Get A Quote.

The BP163060LO jacking and support blocks are used on large heavy stabilisation applications. Able to hold huge weights the blocks are active blocking products used when a person is working on or near a structure or work piece being stabilised. Blox Safety Supports are fit for purpose load rated stabilising blocks with a working load limit (WLL) of 12MPa - 122kg / cm2 – 1740psi at 25°C. The BP163060LO has a maximum capacity of 219,600 kg with the load being spread evenly across the bearing area of the block.

 

The cup and cone profile provide positive interlocking when the blocks are stacked and the top block of a stack can be flipped to provide a flat surface for jacking. Blox come in a high visibility orange colour with handy carry lanyards. They are excellent for use as a single jacking block or in solid cribbing stacks with huge load bearing capacity.

• Certified load rated capacity
• Working Load Limit (WLL)* 122kg/cm2
• Tested under the guidance of AS1170.0.2002 and AS2498.3.1998
• Comprehensive Technical Data Sheets (TDS) available
• 100% recycled high density polyethylene (HDPE) construction for durability
• Lightweight
• Resistant to fuels, oils and most common chemicals
• Will not splinter or rot
• Non-conductive
• Sturdy lanyard for ease of handling
• Operating Temperature range -40°C to +75°C
• 50 year warranty against splitting, rotting, absorption, termites and mould

* Total Block Working Load Limit (WLL) is based on a full press load evenly distributed across the top and bottom surfaces of the safety support/cribbing block.

Warning: Always perform your own risk assessment before using this product. Always know the weight of the equipment or machine being supported. Consult your equipment and machinery manufacturer manual and guidelines for recommended blocking and lifting points. Never exceed the maximum WLL. Under no circumstances does the WLL mentioned above take into consideration point loading or uneven weight distribution of the supported load. Copies of Technical Data Sheets can be obtained by emailing info@safetymits.com or calling 02 9838 8887.

Read less...

To contact Safety MITS about BP163060LO Profiled Safety Support | Heavy Duty Cribbing use Get A Quote.