BP121525LO Profiled Safety Support | Cribbing Blocks

BP121525LO Profiled Safety Support | Cribbing Blocks

The BP121525LO jacking and support blocks are a safer alternative to timber dunnage and blocks used in jacking and stabilising task. Made from recycled plastic to a repeatable formula, strict manufacturing process and quality controls ensure product uniformity. Being made from recycled material is great for the environment and ensures the product meets full sustainability.

• Certified load rated capacity
• Working Load Limit (WLL)* 122kg/cm2
• Tested under the guidance of AS1170.0.2002 and AS2498.3.1998
• Comprehensive Technical Data Sheets (TDS) available
• 100% recycled high density polyethylene (HDPE) construction for durability
• Lightweight
• Resistant to fuels, oils and most common chemicals
• Will not splinter or rot
• Non-conductive
• Sturdy lanyard for ease of handling
• Operating Temperature range -40°C to +75°C
• 50 year warranty against splitting, rotting, absorption, termites and mould

* Total Block Working Load Limit (WLL) is based on a full press load evenly distributed across the top and bottom surfaces of the safety support/cribbing block.

Warning: Always perform your own risk assessment before using this product. Always know the weight of the equipment or machine being supported. Consult your equipment and machinery manufacturer manual and guidelines for recommended blocking and lifting points. Never exceed the maximum WLL. Under no circumstances does the WLL mentioned above take into consideration point loading or uneven weight distribution of the supported load. Copies of Technical Data Sheets can be obtained by emailing info@safetymits.com or calling 02 9838 8887.

Read more...

To contact Safety MITS about BP121525LO Profiled Safety Support | Cribbing Blocks use Get a quote.

The BP121525LO jacking and support blocks are a safer alternative to timber dunnage and blocks used in jacking and stabilising task. Made from recycled plastic to a repeatable formula, strict manufacturing process and quality controls ensure product uniformity. Being made from recycled material is great for the environment and ensures the product meets full sustainability.

• Certified load rated capacity
• Working Load Limit (WLL)* 122kg/cm2
• Tested under the guidance of AS1170.0.2002 and AS2498.3.1998
• Comprehensive Technical Data Sheets (TDS) available
• 100% recycled high density polyethylene (HDPE) construction for durability
• Lightweight
• Resistant to fuels, oils and most common chemicals
• Will not splinter or rot
• Non-conductive
• Sturdy lanyard for ease of handling
• Operating Temperature range -40°C to +75°C
• 50 year warranty against splitting, rotting, absorption, termites and mould

* Total Block Working Load Limit (WLL) is based on a full press load evenly distributed across the top and bottom surfaces of the safety support/cribbing block.

Warning: Always perform your own risk assessment before using this product. Always know the weight of the equipment or machine being supported. Consult your equipment and machinery manufacturer manual and guidelines for recommended blocking and lifting points. Never exceed the maximum WLL. Under no circumstances does the WLL mentioned above take into consideration point loading or uneven weight distribution of the supported load. Copies of Technical Data Sheets can be obtained by emailing info@safetymits.com or calling 02 9838 8887.

Read less...

To contact Safety MITS about BP121525LO Profiled Safety Support | Cribbing Blocks use Get a quote.