RMS-300 Is a unique remote monitoring, data acquisition, and control device specifically designed for use with Battery powered wireless internet repeater sites, or other AC & DC powered remote equipment.
Description
160 Recent ViewsIn Stock
Use RMS-300 to monitor battery levels, room temperature, signal strength (RSSI) on radios and more. RMS-300 has 6 onboard isolated voltmeters giving it the ability to measure DC voltage from -100 to +100 volts with 24 bit accuracy. RMS-300 also has 3 power relays giving it the unique ability to turn on/off devices remotely using an Internet connection. Use the power relays to remote start a generator. RMS-300 has 5 dedicated input pins used for door alarms or to monitor motion sensors. RMS-300 has a full featured serial port, control modems, cell phones, gsm modules, and other devices that use serial communication.
Features
Four layer PCB with Nickel Immersion Gold plating and red solder mask
400 - MHz Arm Processor (500 Mips !)
256 - megs of Nand Flash. Create and store custom applications
64 - megs of SD-Ram
Low Noise Switching Power Supplies accepts 8 - 60 vdc input. Can be powered directly from 12, 24, or 48 volt battery banks
Battery backed-up, real time clock
One onboard temperature sensor –25c +100c
Eight 24 bit isolated voltmeters (+/- 100 VDC). Each voltmeter has its own 24 bit Delta Sigma ADC
Four Latching Relays for devices using 1 – 240v - 16 amps AC/DC current
Three programmable push buttons
Six general purpose I/O pins
Power output port, 5.0vdc (500ma)
Power output port, 3.3vdc (500ma)
One full serial port for controlling cell phones, modems, etc
One console serial port
1-Wire interface for external temperature sensors
Two USB 2.0 ports for cameras, wireless clients, extra Ethernet, etc
To contact Helios Power Solutions about Battery Monitoring - Remote Monitoring Board | RMS-300 use Get a quote.
Use RMS-300 to monitor battery levels, room temperature, signal strength (RSSI) on radios and more. RMS-300 has 6 onboard isolated voltmeters giving it the ability to measure DC voltage from -100 to +100 volts with 24 bit accuracy. RMS-300 also has 3 power relays giving it the unique ability to turn on/off devices remotely using an Internet connection. Use the power relays to remote start a generator. RMS-300 has 5 dedicated input pins used for door alarms or to monitor motion sensors. RMS-300 has a full featured serial port, control modems, cell phones, gsm modules, and other devices that use serial communication.
Features
Four layer PCB with Nickel Immersion Gold plating and red solder mask
400 - MHz Arm Processor (500 Mips !)
256 - megs of Nand Flash. Create and store custom applications
64 - megs of SD-Ram
Low Noise Switching Power Supplies accepts 8 - 60 vdc input. Can be powered directly from 12, 24, or 48 volt battery banks
Battery backed-up, real time clock
One onboard temperature sensor –25c +100c
Eight 24 bit isolated voltmeters (+/- 100 VDC). Each voltmeter has its own 24 bit Delta Sigma ADC
Four Latching Relays for devices using 1 – 240v - 16 amps AC/DC current
Three programmable push buttons
Six general purpose I/O pins
Power output port, 5.0vdc (500ma)
Power output port, 3.3vdc (500ma)
One full serial port for controlling cell phones, modems, etc
One console serial port
1-Wire interface for external temperature sensors
Two USB 2.0 ports for cameras, wireless clients, extra Ethernet, etc
Trade With Confidence. The supplier of this item is approved as a Verified Supplier. Business registration, contact details and locations have been verified. Helios Power Solutions are also proudly displaying these credentials: