AWE Batch Indicator | GS3100

AWE - Batch Indicator | GS3100

Batch Indicator | GS3100

The GS3100 Remote Computer/PLC can Write Messages to the Display & can operate in foreground or background mode

In Stock

The GS3100 Remote Computer/PLC can Write Messages to the Display & can operate in foreground or background mode. It can also send Weight in Stream or On-Deand mode.

What You Get With The GS3100

NOW with ANALOG Output OPTION6HPF for 4-20mA & 0-10VDC 14bit (1:16,000) Accuracy.
MODBUS RTU & ASCII Option Available.
A World First – the First Weight Indicator designed from the ground up as a Front End for Computer/PLC Controlled batching.
Computer/PLCs can use the GS3100 to talk to “factory floor” operators in the plant or across the World. The remote Computer/PLC can completely control the GS3100 including using the GS3100′s display to show messages and the GS3100′s keyboard for operator inputs. (Requires I/O Option)
Turn serial stream data ON and OFF as required. The remote Computer/PLC can turn-on and turn-off the GS3100′s serial weight data stream to obtain high speed weight data only when needed during time critical periods. (Requires I/O Option)
Standard “no-extra cost” RS-232 Serial Output supplies weight data at 4800 or 9600 baud to 20 times per second.
Year 2000 Compliant in every respect.
Full Range of Programmable Settings. The GS3100′s extensive range of keyboard programmable settings allows it to be “customized” to suit any application. All weight calibration and set up is entirely carried out using the GS3100′s keyboard.
Standard Dual Optically Isolated Set points for High and Low Alarms – a vital safety measure. 5-48VDC 1Amp outputs can drive solenoids and relay coils.
Full SIX wire load cell connection automaticallyand accurately compensates for long load cell cable runs typical in weigh/batching applications. NOTE:- FOUR wire products cannot compensate for long cable runs which can result in errors of 10% or more.
Assured and Guaranteed Accuracy and Stability. Every GS3100 shipped has spent one day in our “oven” cycled between operating temperatures of -10oC and +40oC. Its accuracy and stability has been checked and meets or exceeds our specification. Guaranteed – you can rely on it.
High Speed 20/second operation tuned to provide rapid response.
Easy to mount short body enclosures – 150mm Body length and 180mm total depth with connectors allows installation into a standard 200mm depth enclosure.
Easy to Calibrate. Display any weight to 199990 settable with display resolution of 400 to 10,000 divisions and adjustable “count by” settings 1, 2, 5, 10, 20 and 50 – all set via the GS3100′s keyboard.
Added security – the GS3100 records all attempts to access its set up and calibration settings – this information is displayed when power is applied – it is also available with the use of an optional serial I/O card. Operator friendly sensibly sized keyboard and display – 12mm keys and 14mm display.

Specifications

GS3100 Batch Indicator Specifications

Load Cell Input: – 1mV to 45mV; 400-10,000 divisions of 1.00mV/d to 60mV/d. Displays -4% to +104% FS range. Excitation 10VDC Short Circuit Protected drives up to EIGHT 350ohm Load Cells to 230mA max. True differential remote sensing using a separate pair of wires for Full SIX wire load cell connection. Source Impedance 2kohm maximum. Input Impedance 10Mohm minimum.

Frontend Accuracy/Stability: Linearity ±0.01%FS; Span ±15ppm/oC; Zero ±500nV/oC ±30ppm/oC of dead load offset. All units 100% checked for thermal stability over the operating range -10oC to +40oC; Noise 1mV p-p RTI maximum. Active 2Hz 2 Pole Low Pass Analog Filter plus Digital Filtering via 1/2/4 Averaging. Weight update rate 20/second, 10/second or 5/second selectable.

Control Outputs: Two control outputs, one for each set point. Each is an optically isolated open collector capable of sinking 1Amp 5-45VDC from user supplied external power supply.

Standard Serial Output: RS-232C non-isolated serial output, 4800/9600baud. Word composition: 1 start bit; 7 data bits; 1 even parity bit (or 8bits no parity) plus 2 stop bits. Data output user selectable including:- Gross, Net and Tare; Weight Status; Set Point Status; ID Number and Set Point Value. Output rate 20, 10 or 5 per second.

Front Panel: SIX digit 14mm high 7 segment High Intensity red LED display to 199990 plus SIX LED lamps. Positive action tactile feedback fifteen key – keyboard behind tough water resistant membrane.

Standards: Conforms to European Electromagnetic Emissions & Immunity Directive 89/336/EEC and Australian C Tick Standards Approval N1840.

Physical/Environmental: All metal enamel finished panel mounting enclosure c/w panel mounting slides. Front 198mm W x 96mm H; Body 184mm W x 90mm H x 149mm L. Panel cut out 186mm W x 92mm H. Panel rear projection 137mm plus 39mm for standard connectors or plus 58mm for optional serial card connector. Weight 1.9kg; Shipping weight 3kg.Environment -10C to + 40C Operating; -15C to + 70C Storage; to 95%RH non condensing. Power 100-240VAC (specify on order) ±10% 49-62Hz 19VA.

To contact Australian Weighing Equipment about AWE Batch Indicator | GS3100 use Get a quote.

The GS3100 Remote Computer/PLC can Write Messages to the Display & can operate in foreground or background mode. It can also send Weight in Stream or On-Deand mode.

What You Get With The GS3100

NOW with ANALOG Output OPTION6HPF for 4-20mA & 0-10VDC 14bit (1:16,000) Accuracy.
MODBUS RTU & ASCII Option Available.
A World First – the First Weight Indicator designed from the ground up as a Front End for Computer/PLC Controlled batching.
Computer/PLCs can use the GS3100 to talk to “factory floor” operators in the plant or across the World. The remote Computer/PLC can completely control the GS3100 including using the GS3100′s display to show messages and the GS3100′s keyboard for operator inputs. (Requires I/O Option)
Turn serial stream data ON and OFF as required. The remote Computer/PLC can turn-on and turn-off the GS3100′s serial weight data stream to obtain high speed weight data only when needed during time critical periods. (Requires I/O Option)
Standard “no-extra cost” RS-232 Serial Output supplies weight data at 4800 or 9600 baud to 20 times per second.
Year 2000 Compliant in every respect.
Full Range of Programmable Settings. The GS3100′s extensive range of keyboard programmable settings allows it to be “customized” to suit any application. All weight calibration and set up is entirely carried out using the GS3100′s keyboard.
Standard Dual Optically Isolated Set points for High and Low Alarms – a vital safety measure. 5-48VDC 1Amp outputs can drive solenoids and relay coils.
Full SIX wire load cell connection automaticallyand accurately compensates for long load cell cable runs typical in weigh/batching applications. NOTE:- FOUR wire products cannot compensate for long cable runs which can result in errors of 10% or more.
Assured and Guaranteed Accuracy and Stability. Every GS3100 shipped has spent one day in our “oven” cycled between operating temperatures of -10oC and +40oC. Its accuracy and stability has been checked and meets or exceeds our specification. Guaranteed – you can rely on it.
High Speed 20/second operation tuned to provide rapid response.
Easy to mount short body enclosures – 150mm Body length and 180mm total depth with connectors allows installation into a standard 200mm depth enclosure.
Easy to Calibrate. Display any weight to 199990 settable with display resolution of 400 to 10,000 divisions and adjustable “count by” settings 1, 2, 5, 10, 20 and 50 – all set via the GS3100′s keyboard.
Added security – the GS3100 records all attempts to access its set up and calibration settings – this information is displayed when power is applied – it is also available with the use of an optional serial I/O card. Operator friendly sensibly sized keyboard and display – 12mm keys and 14mm display.

Specifications

GS3100 Batch Indicator Specifications

Control Outputs: Two control outputs, one for each set point. Each is an optically isolated open collector capable of sinking 1Amp 5-45VDC from user supplied external power supply.

Standards: Conforms to European Electromagnetic Emissions & Immunity Directive 89/336/EEC and Australian C Tick Standards Approval N1840.

Read less...

To contact Australian Weighing Equipment about AWE Batch Indicator | GS3100 use Get a quote.

Brochure(0.96MB)

Let Australian Weighing Equipment provide you with a quote

Supplier

Get a quote

Supplier: Australian Weighing Equipment

Distribution: Australia & New Zealand

Location: Ingleburn, NSW

Trade With Confidence. The supplier of this item is approved as a Verified Supplier. Business registration, contact details and locations have been verified. Australian Weighing Equipment are also proudly displaying these credentials:

Established:

1981

Employees:

51-200

Distribution:

Australia & New Zealand

Location:

Ingleburn , NSW

Joined:

Mar 2021

Level:

Standard Storefront