Automatic Transfer Switch | ATL600/610 for sale from Mechtric

Automatic Transfer Switch | ATL600/610

Supplier: Mechtric

Automatic Transfer Switch | ATL600/610

The automatic transfer switch controllers ATL 600 / ATL 610 are used for the automatic or manual switching of the load from the MAIN LINE to a stand-by or emergency SECONDARY LINE and vice-versa.

35 Recent Views In Stock

ATL600 / 610:

Auxiliary Supplies:

auxiliary supply voltage: 110…240VAC 12/24VDC only for ATL 610.
operating range: 90…264VAC; 9…36VDC only for ATL 610.

Voltage measurement inputs:

rated voltage Ue: 100…480VAC (L-L)
measuring range: 50…576VAC (L-L).
frequency range: 45…65Hz..

Programmable digital inputs

negative inputs.

Programmable relay outputs

5 each with 1 normally open contact (NO – SPST) rated 8A 250VAC.
2 each with 1 changeover contact (NO/NC – SPDT) rated 8A 250VAC.

Enclosure

flush-mount housing: 144x144mm/5.7×5.7”.
protection rating: IP40 on front; IP65 optional with seal EXP80 01; IP20 at rear.

General Characteristics:

Supply Input
• single in AC for ATL600.

• dual in AC and DC for ATL610.
Measurement inputs for three phase + neutral voltage values; also suitable for 1 and 2 phase lines.
128×90 backlit graphic LCD to display measurements, events and alarms in 5 languages (English, Italian, French, Spanish and German).
2 status indication LEDs
6 programmable digital inputs.
7 programmable relay outputs.
Viewing of L-L and L-N voltage values of the controlled lines.
Status viewing of contactor or motorised circuit breakers.
Configuration programming of lines, control and supervision parameters for emergency demand of generating set.
Event logging.
Microprocessor supervision of functions; including virtual real time clock for ATL610.
Communication interface via front optical port with CX01 or CX02 dongle using USB or Wi-Fi.
Compatible with Synergy supervision and energy management software, Xpress remote control and configuration software and with the Sam1 application for Androids/iOS.
Modbus-RTU, ASCII and TCP communication protocol.

Control Functions of the Lines:

Phase sequence and phase loss.
Minimum and maximum voltage.
Voltage asymmetry.
Minimum and maximum frequency.

Order Code	Description
ATL600	Non-expandable, transfer switch controller, automatic with optical port for 2-line control (144x144mm / 5.7×7.7″), 110…240VAC supply, 0.600kg.
ATL610	Expandable with EXP… modules, transfer switch controller, automatic with optical port for 2-line control (144x144mm / 5.7×5.7″), 110…240VAC supply and 12/24VDC, 0.680kg.

To contact Mechtric about Automatic Transfer Switch | ATL600/610 use Get a quote.

ATL600 / 610:

Auxiliary Supplies:

auxiliary supply voltage: 110…240VAC 12/24VDC only for ATL 610.
operating range: 90…264VAC; 9…36VDC only for ATL 610.

Voltage measurement inputs:

rated voltage Ue: 100…480VAC (L-L)
measuring range: 50…576VAC (L-L).
frequency range: 45…65Hz..

Programmable digital inputs

negative inputs.

Programmable relay outputs

5 each with 1 normally open contact (NO – SPST) rated 8A 250VAC.
2 each with 1 changeover contact (NO/NC – SPDT) rated 8A 250VAC.

Enclosure

flush-mount housing: 144x144mm/5.7×5.7”.
protection rating: IP40 on front; IP65 optional with seal EXP80 01; IP20 at rear.

General Characteristics:

Supply Input
• single in AC for ATL600.

• dual in AC and DC for ATL610.
Measurement inputs for three phase + neutral voltage values; also suitable for 1 and 2 phase lines.
128×90 backlit graphic LCD to display measurements, events and alarms in 5 languages (English, Italian, French, Spanish and German).
2 status indication LEDs
6 programmable digital inputs.
7 programmable relay outputs.
Viewing of L-L and L-N voltage values of the controlled lines.
Status viewing of contactor or motorised circuit breakers.
Configuration programming of lines, control and supervision parameters for emergency demand of generating set.
Event logging.
Microprocessor supervision of functions; including virtual real time clock for ATL610.
Communication interface via front optical port with CX01 or CX02 dongle using USB or Wi-Fi.
Compatible with Synergy supervision and energy management software, Xpress remote control and configuration software and with the Sam1 application for Androids/iOS.
Modbus-RTU, ASCII and TCP communication protocol.

Control Functions of the Lines:

Phase sequence and phase loss.
Minimum and maximum voltage.
Voltage asymmetry.
Minimum and maximum frequency.

Order Code	Description
ATL600	Non-expandable, transfer switch controller, automatic with optical port for 2-line control (144x144mm / 5.7×7.7″), 110…240VAC supply, 0.600kg.
ATL610	Expandable with EXP… modules, transfer switch controller, automatic with optical port for 2-line control (144x144mm / 5.7×5.7″), 110…240VAC supply and 12/24VDC, 0.680kg.

Read less...

To contact Mechtric about Automatic Transfer Switch | ATL600/610 use Get a quote.

Let Mechtric provide you with a quote

Supplier

Get a quote

Supplier: Mechtric

Distribution: Australia and New Zealand

Location: Malaga, WA

Trade With Confidence. The supplier of this item is approved as a Verified Supplier. Business registration, contact details and locations have been verified. Mechtric are also proudly displaying these credentials:

Established:

1964

Employees:

21-50

Distribution:

Australia and New Zealand

Location:

Malaga , WA

Joined:

Jul 2003

Level:

Premium Storefront