ASI | Emissions Monitoring System | Diluting Module DM-100 CEM

ASI | Emissions Monitoring System | Diluting Module DM-100 CEM

The ASI Model DM-100 Series Diluting Modules have been developed to meet the requirements of some of our more specialized applications, where our standard in-situ dilution probe or a rather complex and expensive ex-situ (extractive) dilution system is simply not practical. Whether your primary diluting device is to be used as a stand-alone unit for laboratory applications, or integrated within an OEM's heated filter system design for CEM Systems (thereby producing a basic ex-situ diluting sampler), or even integrated into your ambient level gas analyzer for process monitoring, the DM-100 is a great solution. Originally designed as a second stage diluting unit, downstream of an in-situ or ex-situ dilution probe, the DM-100 can also produce extremely high dilution ratios should your application call for it.

Key Features

• Extremely low sample flow rates 
• Compact and lightweight design 
• Reduces the moisture content in the sample stream 
• Reduces the maintenance and prolongs analyzer life when dealing with harsh samples
• Permits use of ambient level (low range) analyzers to measure highly concentrated streams
• Normal dilution ratios from 12:1 up to 350:1. Ratios to 122,500:1 can be achieved when modules are in series (or module used as secondary diluter to an in-situ or ex-situ dilution probe)
• Can be used in hazardous areas; no steam or electrical service required (non-heated version)
• Installation flexibility; mounting brackets supplied as standard to allow for installation of the diluter within your pneumatic controller enclosure or analyzer
• Special mounting provisions will allow for installation in your heated enclosure to ensure temperature stability as needed and can be heated to well over 350 F (177?C)
• Wetted parts from stainless 316/316L. Complete with all fittings, mounting brackets and one critical orifice (available in Glass, Monel-400, or Stainless-316)
• Special coatings by SilcoTek® (such as SilcoNert®, Dursan®, and Silcolly®) are also available

Application

• A Continuous Emissions Monitoring System used for dilution

Read more...

To contact AquaGas about ASI | Emissions Monitoring System | Diluting Module DM-100 CEM use Get a quote.

The ASI Model DM-100 Series Diluting Modules have been developed to meet the requirements of some of our more specialized applications, where our standard in-situ dilution probe or a rather complex and expensive ex-situ (extractive) dilution system is simply not practical. Whether your primary diluting device is to be used as a stand-alone unit for laboratory applications, or integrated within an OEM's heated filter system design for CEM Systems (thereby producing a basic ex-situ diluting sampler), or even integrated into your ambient level gas analyzer for process monitoring, the DM-100 is a great solution. Originally designed as a second stage diluting unit, downstream of an in-situ or ex-situ dilution probe, the DM-100 can also produce extremely high dilution ratios should your application call for it.

Key Features

• Extremely low sample flow rates 
• Compact and lightweight design 
• Reduces the moisture content in the sample stream 
• Reduces the maintenance and prolongs analyzer life when dealing with harsh samples
• Permits use of ambient level (low range) analyzers to measure highly concentrated streams
• Normal dilution ratios from 12:1 up to 350:1. Ratios to 122,500:1 can be achieved when modules are in series (or module used as secondary diluter to an in-situ or ex-situ dilution probe)
• Can be used in hazardous areas; no steam or electrical service required (non-heated version)
• Installation flexibility; mounting brackets supplied as standard to allow for installation of the diluter within your pneumatic controller enclosure or analyzer
• Special mounting provisions will allow for installation in your heated enclosure to ensure temperature stability as needed and can be heated to well over 350 F (177?C)
• Wetted parts from stainless 316/316L. Complete with all fittings, mounting brackets and one critical orifice (available in Glass, Monel-400, or Stainless-316)
• Special coatings by SilcoTek® (such as SilcoNert®, Dursan®, and Silcolly®) are also available

Application

• A Continuous Emissions Monitoring System used for dilution

Read less...

To contact AquaGas about ASI | Emissions Monitoring System | Diluting Module DM-100 CEM use Get a quote.