AIRPOT Piston Cylinder Sets
The Cylinder Sets feature Airpot’s borosilicate glass cylinder and graphite piston material technology which allows the use of extremely tight tolerances to achieve a high precision fit and control of leak while offering a seal-less, self -lubricating pneumatic or light-load bearing device.
Each piston and cylinder set is individually matched for optimal performance. The ultra low friction pistons will respond to single gram forces and low pressures of less than 0.2 psi. Stiction is virtually eliminated, meaning nearly identical starting and running friction, and movement that is uniformly smooth and consistent from the start and throughout the full stroke cycle.
Unaffected by extreme temperature variations, Airpot piston and cylinder sets run clean and do not contaminate surrounding components. No piston seals are required, and there are no liquids or lubricants to leak. Materials used are capable of exceedingly high cycle rates. They do not heat up or materially change under conditions of rapid and/or continuous cycling and have a life-span of multi-millions of cycles.
Designers use Airpot piston and cylinder kits as linear bearings, vacuum pickups, inertia sensors, portable piston pumps, position sensors, spool valves, flow indicators, pressure sensors, dispensers, pneumatic calibration devices, Stirling Engine power pistons, and for many other demanding applications. Airpot piston and cylinder kits exhibit very low mass, no deterioration or change in performance due to age or non-use, have the ability to move linearly and rotationally simultaneously, and use a clear, see-through cylinder.
When driven by pressurized air, maximum performance can be enhanced when used in conjunction with Airpot’s precision FFR low pressure filter/regulator products.
The cylinders are available in bore sizes ranging from 0.220” to 1.75”, and lengths from the desired stroke plus 0.325” to the desired stroke plus 0.880”. All models exhibit friction of less than 1 gram (in the absence of side loads).
***If you are not sure what you need, give us a call and quote IndustrySearch to discuss your needs.
To contact CGB Precision Products about AIRPOT Piston Cylinder Sets use Get a quote.
The Cylinder Sets feature Airpot’s borosilicate glass cylinder and graphite piston material technology which allows the use of extremely tight tolerances to achieve a high precision fit and control of leak while offering a seal-less, self -lubricating pneumatic or light-load bearing device.
Each piston and cylinder set is individually matched for optimal performance. The ultra low friction pistons will respond to single gram forces and low pressures of less than 0.2 psi. Stiction is virtually eliminated, meaning nearly identical starting and running friction, and movement that is uniformly smooth and consistent from the start and throughout the full stroke cycle.
Unaffected by extreme temperature variations, Airpot piston and cylinder sets run clean and do not contaminate surrounding components. No piston seals are required, and there are no liquids or lubricants to leak. Materials used are capable of exceedingly high cycle rates. They do not heat up or materially change under conditions of rapid and/or continuous cycling and have a life-span of multi-millions of cycles.
Designers use Airpot piston and cylinder kits as linear bearings, vacuum pickups, inertia sensors, portable piston pumps, position sensors, spool valves, flow indicators, pressure sensors, dispensers, pneumatic calibration devices, Stirling Engine power pistons, and for many other demanding applications. Airpot piston and cylinder kits exhibit very low mass, no deterioration or change in performance due to age or non-use, have the ability to move linearly and rotationally simultaneously, and use a clear, see-through cylinder.
When driven by pressurized air, maximum performance can be enhanced when used in conjunction with Airpot’s precision FFR low pressure filter/regulator products.
The cylinders are available in bore sizes ranging from 0.220” to 1.75”, and lengths from the desired stroke plus 0.325” to the desired stroke plus 0.880”. All models exhibit friction of less than 1 gram (in the absence of side loads).
***If you are not sure what you need, give us a call and quote IndustrySearch to discuss your needs.
To contact CGB Precision Products about AIRPOT Piston Cylinder Sets use Get a quote.
Thanks for your help!
Sorry! Unable to submit your request at this time. Please try again later.
Report this product