3D Printer | Desktop Metal Studio Get latest price

3D Printer | Desktop Metal Studio

73 Recent Views In Stock

Traditionally, metal 3D printing has been known to be too expensive for prototyping and not efficient enough for mass production. But with Desktop Metal Studio, metal 3D printing is being pushed beyond its current limits.

Safe
NO Hazardous Powders, NO Respirators, NO External Ventilation, NO 480V 3-Phase Power, NO Stress Relief, NO Dedicated Operators, NO Welded Supports, NO Special Facilities, NO Dangerous Lasers, NO 3rd Party Equipment

10x cheaper
The Studio system is up to ten times cheaper than comparable laser-based systems. With purchase and payment plan pricing options, it’s the only metal 3D printing system that is cost-effective for engineering teams.

Prototype and mass produce with the same alloys
We designed our systems to use the same MIM (Metal Injection Molding) materials. This opens up an ecosystem of low-cost, high-quality alloys with a mature supply chain and well-studied process controls.

200+ compatible alloys
By enabling the use of metal powders from the MIM industry, our systems have access to a wide range of existing materials—from steels and aluminum to superalloys and titanium.

Up to 80% cheaper
Laser-based systems require specially formulated, cost-prohibitive metal powders. We use metal powder with a wide particle size distribution, enabling much lower materials costs.

Printer Specs

• SPEED: 16cm³/hr
• LAYER HEIGHT: 50µm
• BUILD AREA: 300mm(W) x 200mm(D) x 200mm(H)

Debinder for sintering Specs

• FLUID VOLUME: 17.4L max
• VAPOUR MANAGEMENT: no external ventilation required
• FOOT PRINT: 740mm(W) x 1020mm(H) x 570mm(D)

Furnace Specs

• GAS CONNECTION: 2 x 900L onboard canisters
• PEAK TEMP: 1400°C
• FOOT PRINT: 1380m(W) x 1620mm(D) x 750mm(H) 

 

View a Product brochure here 

Available from June 2018.

For more information or a quote please call or use the IndustySearch email form for a direct reply.

 

 

Read more...

To contact Objective3D about 3D Printer | Desktop Metal Studio use Get a quote.

Traditionally, metal 3D printing has been known to be too expensive for prototyping and not efficient enough for mass production. But with Desktop Metal Studio, metal 3D printing is being pushed beyond its current limits.

Safe
NO Hazardous Powders, NO Respirators, NO External Ventilation, NO 480V 3-Phase Power, NO Stress Relief, NO Dedicated Operators, NO Welded Supports, NO Special Facilities, NO Dangerous Lasers, NO 3rd Party Equipment

10x cheaper
The Studio system is up to ten times cheaper than comparable laser-based systems. With purchase and payment plan pricing options, it’s the only metal 3D printing system that is cost-effective for engineering teams.

Prototype and mass produce with the same alloys
We designed our systems to use the same MIM (Metal Injection Molding) materials. This opens up an ecosystem of low-cost, high-quality alloys with a mature supply chain and well-studied process controls.

200+ compatible alloys
By enabling the use of metal powders from the MIM industry, our systems have access to a wide range of existing materials—from steels and aluminum to superalloys and titanium.

Up to 80% cheaper
Laser-based systems require specially formulated, cost-prohibitive metal powders. We use metal powder with a wide particle size distribution, enabling much lower materials costs.

Printer Specs

• SPEED: 16cm³/hr
• LAYER HEIGHT: 50µm
• BUILD AREA: 300mm(W) x 200mm(D) x 200mm(H)

Debinder for sintering Specs

• FLUID VOLUME: 17.4L max
• VAPOUR MANAGEMENT: no external ventilation required
• FOOT PRINT: 740mm(W) x 1020mm(H) x 570mm(D)

Furnace Specs

• GAS CONNECTION: 2 x 900L onboard canisters
• PEAK TEMP: 1400°C
• FOOT PRINT: 1380m(W) x 1620mm(D) x 750mm(H) 

 

View a Product brochure here 

Available from June 2018.

For more information or a quote please call or use the IndustySearch email form for a direct reply.

 

 

Read less...

To contact Objective3D about 3D Printer | Desktop Metal Studio use Get a quote.